DIY toilet paper holder. Metal floor standing toilet paper holders. Choosing a toilet paper holder

18.04.2019

Quite often, the typical user is faced with the problem of a malfunctioning mouse. There may be several reasons for this, and it can be difficult to determine the specific one, why the computer does not see the mouse. This article discusses the most common problems and breakdowns that occur with "rodents" of different price categories and technical features... So let's get started!

Why the computer does not "see" the mouse: how to determine the cause and solve the problem

The failure of any input device as a whole can be attributed to one of three reasons:

Broken USB port;
The device itself is broken (in our case, the mouse);
Device drivers not installed or working incorrectly.

In addition to the above, there may be another reason. For example, in additional software or driver incompatibility. But first, let's consider these three problems, because they almost always lead to the fact that the computer "does not see" the mouse.

Faulty USB port

Before talking about the breakdown of the mouse itself, it makes sense to check the USB port to which you connect it. Very often the mouse refuses to work because the port is physically broken. By the way, the same applies to the PS / 2 port, which is used to connect older models to personal computers. So, first of all, let's check the connector itself.

Visual inspection of the connector

This is what a working USB port looks like.

A working USB connector will work with other USB devices. So the first thing to do is try connecting a USB flash drive or other mouse to it. If the computer "does not see" them either, then the port is broken or faulty.

Check for physical defects first. To do this, carefully inspect the connector. It should look something like the photo above. Mainly check if the white strip is cracked (might be black or blue for USB 3.0). If possible, take a deeper look. You will see six golden contacts. The absence of any of them also indicates a breakdown.

If the USB port visually looks good, the reason may lie in the software part.

Checking the software connection of the USB port in Windows and Linux

Since the computer “does not see” the mouse, it makes sense to check if it “sees” the USB port itself. The easiest way to do this is through the BIOS. To enter the BIOS, you need to press a specific key (Del, F12, or others) in the first few seconds after turning on the computer. Usually you will see a hint about which key to press.

Go to the BIOS with the Del key

After entering the BIOS, find the menu item (moving by using the arrow keys) "Integrated Peripherals" or "Advanced". Enter it with the Enter key. On the screen that opens, you will see the "USB Configuration" item. Go to it.

USB setup in BIOS

Items "USB Functions" and "USB Controller" must have the property. Otherwise, press Enter to switch the mode.

Device Manager window

Now let's check the USB port drivers. To do this in Windows, follow the path: Start -> Control Panel -> Hardware and Sound -> Device Manager. In the window that opens, find the item "USB Controllers" and double-click on it. The presence of a question mark opposite any of the rows in the list indicates the absence of a driver. So it needs to be installed. The driver may be located on the disk that came with motherboard or (for laptops) on the manufacturer's website. If there are no signs, right-click on each item and select "Update Drivers".

You can check the connection and USB port drivers on Linux with the command “lspci | grep -i usb ". It will result in a list of USB ports, the number of rows of which should correspond to the number of available connectors on the device. For example:

00: 03.0 USB Controller: Silicon Integrated Systems USB 1.1 Controller (rev 0f)
00: 03.1 USB Controller: Silicon Integrated Systems USB 1.1 Controller (rev 0f)
00: 03.3 USB Controller: Silicon Integrated Systems USB 2.0 Controller

So, if none of the above helped or did not take place, then the problem is still in the mouse itself.

Video: Installing the USB Driver

The mouse is broken directly

If everything is in order with the computer, you need to check the hardware and software of the mouse. Among the main hardware reasons for the incorrect operation of the input device should be highlighted:

Sensor malfunction;
Broken wire or USB adapter;

Sensor malfunction

Very often, the reason for the inoperability of a mouse is a broken sensor. It is quite easy to define it, but not always. In most modern optical mice, the sensor is highlighted in red. Just flip the mouse over (when it's connected to your computer) and check this fact.

Working sensor

But many manufacturers (especially laser "rodents") make the sensor invisible, that is, without a characteristic glow. It is then impossible to manually determine if the sensor is working. In this case, go to the next step.

What to do if a wire or USB adapter breaks down

If you are using a wired mouse, it makes sense to check the wire between the device and the computer. Strong bends can cause breakage. Also, check the USB output of the mouse itself (just as you checked the computer's USB port earlier).

Wireless mouse adapter

If you are using a wireless mouse, check the mouse adapter in the same way. If it breaks down, the adapter can be replaced with a new one. But only an employee of the service center can choose the one you need. So it's better (and cheaper) to just get a new mouse.

The problem with the software part

If none of the causes of the hardware malfunction are identified, the problem is most likely a software problem. Namely, in the drivers. First of all, if your mouse suddenly fails, restart your computer. Sometimes it helps, but not as often as we would like.

The main problems of the drivers can be classified as follows:

The driver is not installed;
The driver is not suitable for your device;
The driver is out of date;
Program conflict.

Driver not installed

Sample Logitech Mouse Driver Window

The reason may be obvious, but not always. The fact is that not all manufacturers put a CD with drivers in the box with the mouse. If you do not have one, go to the official website of the mouse brand and look for the driver there. After installation, you may have a special program for adjusting the mouse (as, for example, in the photo). Run it and follow the internal instructions.

To check if the mouse driver is installed on Windows, go to Device Manager (the transition process is described above). There, find the item "Mice and other pointing devices". The absence of question marks indicates that the driver is working correctly. You can also update it right there, as we did earlier for USB ports. To see the installed drivers on Linux, enter the "lspci" command.

By the way, most manufacturers load the base driver into a USB adapter or outlet, so you don't have to worry about installing it. In this context, we are talking more about special driver programs.

Doesn't fit your device

If you downloaded the driver yourself, chances are good that it simply does not fit your device. In this case, it is better to remove it. If the mouse does not work with or without a driver, contact the support service on the manufacturer's website. They will help you choose the software you want.

It is likely that the driver version for your mouse is not compatible with your specific operating system. For example, older programs are not supported on Windows 10, or not all manufacturers provide drivers for Linux-like operating systems. You can find out about compatibility on the manufacturer's website or on the box with the mouse. V in this case only reinstalling the operating system or replacing the mouse will help. Remember that you can return an item to the store before 14 days after purchase.

Video: Installing the Driver via Device Manager

The driver is out of date

It is unlikely that the old version of the driver will suddenly stop working, but it is still possible. Just look for an update on the manufacturer's website, or simply reinstall the driver.

Program conflict

This problem quite often becomes the reason for the incorrect operation of many programs. Its essence lies in the fact that some applications can come into "conflict" - interfere with each other to execute their code. The emergence of a conflict most often occurs when the two programs are similar. For example, if you have installed additional software to control or customize your mouse, it may conflict with the main driver. As a result, the mouse stops working at all.

On Windows, you can easily determine if there is a conflict. To do this, restart your computer in safe mode. Now click "Start" and place the cursor on the line "Find programs and files". Type "msconfig" and press Enter.

Msconfig utility window

On the Services tab, check the box next to "Don't display Microsoft services." Now uncheck all services in the main window. Reboot your computer. If the problem is indeed a program conflict, your mouse will work in this mode. Go back to "msconfig" and restore all the overlays.

Knowing that the problem is a software conflict, you should try to uninstall those applications that you installed recently. If you remember at what point the mouse stopped working, there will be no problems at all.

Video: how to determine what is missing in the software

Why the computer mouse does not work - the main reasons

First, the reason is the batteries. Replace batteries if your mouse is wireless.

While its bottom is still red and blinking, this does not necessarily mean that it is still functional.

Second: dust. Clean the underside with a clean cloth and make sure there are no dust particles affecting its performance.

If you have followed all these steps and the problem persists, the following are the most common problems and their solutions.

Reason one

The mouse cursor does not move smoothly. SOLUTION: If the mouse cursor does not move smoothly, the most likely cause may be dust in the mouse sensor or on the surface, be it a rug or table.

Perform a thorough cleaning with a clean cloth and free from chemicals that cause even more problems.

Reason two

Another factor that may be causing this malfunction is if you are using the mouse on a glossy surface.

Some mice, especially optical and laser mice, have difficulty tracking movement on glossy surfaces such as glass. Try using matte surfaces instead.

Reason three

Problem: The mouse pointer freezes. SOLUTION: Most probable cause this problem has to do with the central processing unit of your computer.

In this case, more programs than necessary or background applications may be running, and you may not even be aware of this.

This is of course very annoying. What to do? Wait a few seconds - these are the simplest solutions and often the best.

Just wait a few seconds to see if the problem has resolved. If it is not eliminated and repeats, then further research is needed.

Some computer programs run in the background without your knowledge (you don't even see them).

Look in the lower right corner of the Windows desktop (), if there are extra ones, then turn them off, and if they are not needed at all, then delete them completely.

Reason four

The mouse doesn't work at all. SOLUTION: this can happen from various problems... Some of them may be software and hardware related.

The mouse may not work as a result of a poor connection, faulty wiring, or a defective USB port.

Double check the integrity of your ports and make sure they are fully functional.

Some wireless devices (and some wired ones) require a driver to be installed. Make sure it is installed.

Reason five

PROBLEM: The mouse pointer moves too slowly or too quickly.

SOLUTION: In this problem, only one solution is in software configuration.

This can be easily fixed by going to => Mouse => Pointer Options =>.

Change the speed of the cursor to the desired level by moving the slider up or down until you feel comfortable working. Good luck.

A bathroom is, as a rule, a small room, where you need to place many different little things so that they do not interfere and do not create the appearance of a mess. Everything here should be thought out even at the stage of renovation: comfortable shelves, spacious niches, plumbing fittings organically integrated into the overall design are designed to create comfortable conditions for good rest... At the same time, even the smallest detail can not only spoil appearance rooms, but it is also elementary to interfere. To avoid such troubles, all interior details must be selected in accordance with the size of the room or hidden in niches.

Toilet paper holder - required element any bathroom, which is difficult to do without, because the high humidity characteristic of this room can cause the roll to get wet. If you put it in a closed container, it can be easily avoided. This applies primarily to combined bathrooms, but even in a separate toilet, where the humidity level is low, it is undesirable to store paper on open shelves or on the floor - this is unhygienic and not always convenient. Another thing is its placement on a holder, which can be installed in any convenient place.

Plastic toilet paper holder

There are two main types of holders: wall-mounted and floor-standing. The first are divided into several types:

closed, the design of which provides for the presence of a container for a roll and top cover... The paper is completely hidden inside, and only its tip peeps out, pulling on which it is easy to unwind the required amount. To replace the roll, just lift the cover;
open, which is a hook on which the paper is attached. This is the simplest and cheapest option, but it is used less and less, since it looks unpresentable and does not protect paper from moisture;
built-in- a holder that is not simply attached to the wall, but built into a special niche. The niche itself needs to be taken care of even at the stage of design development and repair, taking into account the dimensions of the holder and the roll. It contains a container of paper, the tip of which protrudes outward, as is the case with a closed holder. If it is necessary to replace the roll, the container moves out;
wall rack which can be horizontal or vertical. Vertical racks are more often used due to their compactness, but horizontal ones are also popular. A feature of such holders is their versatility and multifunctionality. They not only fix a roll of paper, but also store its stock in a special basket, and also provide a stand for a brush, a shelf for detergents and other little things. The holder for toilet paper with a shelf is very convenient, functional and takes up little space;
mobile- a holder that is attached to the wall with a quick-release fastener. It can be closed, but more often open models of light weight and the most simple design are used. A striking example- a holder for toilet paper with suction cups, which can be easily removed and moved to a new place. The disadvantage of such models is the unreliability of the fastening. Suction cups often peel off by themselves, do not withstand significant loads, and they do not look the best way... The only exception can be made by hand-made suction cup holders. In this case, they will certainly delight the eye, and this type of attachment will simplify their design.

But you don't have to hang a toilet paper holder on the wall. The floor-standing version is widely used in spacious bathrooms. With such a layout, there is not always a wall near the toilet on which the wall structure can be fixed, and the floor holder is easy to install in the right place to keep the paper close at hand. There are two main types of floor holders: regular and multifunctional. The first option is a regular stand on which a roll of paper is strung. It is rarely used, since even a very beautiful rack, topped with paper, looks ridiculous and takes up too much space.

Floor standing toilet paper holder

Much more rational is the use of a multifunctional floor model, the design of which provides for a container for storing spare rolls, a shelf for household chemicals etc. Such a floor holder for toilet paper and a brush, although it has a relatively big sizes, fully justifies its presence in the bathroom, since it can replace several shelves by freeing free place on the walls. Since it is not fixed in one place, it is easy to move thanks to light weight as well as wash.

Holder materials

Like most interior elements for a bathroom and toilet, a toilet paper holder, floor or wall, is made of moisture-resistant material - plastic or metal.

Other materials (textiles, wood) can be used as decor, but you still need to remember about the effect of high humidity on their appearance.

Both plastic and metal have their pros and cons, so each option must be considered separately:

plastic toilet paper holder traditionally belongs to the economy class. It is lightweight, cheap, easy to clean, can have different colors, but at the same time it is very fragile, short-lived, quickly burns out and loses its initial appearance... It is better to choose holders made of plastic, wall-mounted, open or closed, or built-in, but you should immediately abandon the racks;
metal holders for toilet paper, the photos of which can be viewed below, are much more presentable and more expensive than plastic ones. They are more durable, reliable and durable, with proper care will be able to serve for many years. Their surface can be simply polished metal or with a coating applied to it: paint, chrome or dusting, which significantly expands their use in the design of bathrooms in different styles... The disadvantage of metal holders with a painted surface is the fragility of the decorative layer. Even the highest quality coatings will sooner or later start to wear off, so for long-term use it is better to choose ordinary polished hardware made of stainless steel.

Original toilet paper holder

Choosing a toilet paper holder

To choose a high-quality holder, you need to take into account not only its appearance, but also its other characteristics, as well as the features of the bathroom. First of all, you need to choose the material of the product. If the holder is bought "for years", it is definitely worth giving preference to metal, the plastic will be able to serve in best case a year or two. Low-quality products often and rather flimsy in appearance, with unreliable joints and uneven color, they are not even considered when choosing. As for the decorative layer, it must be moisture resistant, so this point must be checked with the sellers.

In terms of shape and color, the holder is selected in accordance with the style of the bathroom, everything here depends on the taste and preferences of the owners. At the same time, the product must be in harmony with other decorative elements: shelves, soap dish, glasses, etc. Aged in one style, such little things form an overall complete picture.

Creative solutions for the selection and production of paper holders

Oddly enough, but even an ordinary holder in the bathroom can become an original piece of furniture that attracts attention - you just need to dream up a little. In fact, it is these little things, selected or made by yourself, that become the highlight that turns a standard repair into an original one. design solution, so you can safely let go of your imagination and not be afraid to experiment.

Plastic toilet paper holder

There are a huge number of options: the paper can be held by an athlete lifting a barbell with rolls strung on it, or maybe the roll will be in his hands beautiful lady? Interesting and unusual solutions can be viewed on our website.

DIY holder

The simplest holder design is the hook that holds the roll. It is she who is often the basis for those who want to make a holder on their own. As a starting material, a regular wire hanger is suitable, which is likely to be found in every home. It can also be used to make other useful things for the bathroom or kitchen, for example, glass coasters. The hanger can also be replaced with galvanized wire, but the manufacturing technology will remain the same.

For manufacturing, you will need a wire hanger and galvanized wire for decoration. From the tools, you need to prepare pliers, wire cutters and pliers for working with wire, a wooden block, a screw and a drill for fixing the structure during the manufacturing process, as well as a felt-tip pen and a ruler.

So, the sequence of turning a wire hanger into a do-it-yourself toilet paper holder:

the hanger is unravel and straightened with pliers (they should be with parallel lips). Unnecessary parts are cut off with nippers;
a hole is made in a pre-prepared bar using a drill, into which the screw is not completely screwed in, ensuring the wire is fixed in the desired position. The wire is wrapped around it so that the loop is located in the middle, after which the screw is screwed in until it stops;
the ends of the wire are bent in the shape of a heart, there should be about 6 cm between its tip and the screw. At the tip of the heart, the wire is twisted, its ends are bent at an angle of 90º;
the screw is slightly unscrewed, and the resulting heart is removed from the bar, after which it is screwed back into place;
from the bottom of the heart along the free ends, 6 cm is measured and marks are made. As before, with the help of a screw, the wire is bent in the marked places at an angle of 90º;
the ends of the wire are again divided into parts in a ratio of 8: 3: 3: 2: 2 (the values can be adjusted according to the remaining length of the wire), a felt-tip pen is used for the marks. According to the marks, the wire is bent at an angle of 90º so that its ends are directed inward;
as a decoration, the resulting structure is wrapped with galvanized wire 0.8 mm. For better effect the turns should not fit snugly against each other.

As you can see, nothing complicated. No need for expensive raw materials, no complicated tools, just a little patience and imagination. Such original holder will surely decorate the bathroom.

Chrome toilet paper holder

For many, the bathroom is a small room. Anything that is out of place can create a sense of disorder. Everything should be in place in a small room and toilet paper is no exception.

If stored incorrectly, it falls or unwinds, causing inconvenience to the owners. To avoid problems, you can make a do-it-yourself toilet paper holder.

The wall holder is now the most common form of paper storage. The main advantage is small size... Wall-mounted in one convenient location, does not take up much space. Among the wall mounts, the following types stand out:

Wall rack. It looks like a floor holder. The stand is attached to the wall. There are usually two options: vertical or horizontal. Vertical view takes up less space. The wall-mounted element is multifunctional: for example, in addition to paper, you can attach a basket for spare rolls to it or provide space for an air freshener.
Built-in holder. This is the most static way to store paper. Usually installed in a wall niche. This moment is being considered at the stage of renovation. The drop-in holder is a pull-out container. The paper goes through a special hole in the decorative strip. To insert a new roll of paper into the container, it must be pulled out of the wall.
Open type. Represents regular hook on which the paper core is threaded. This type of storage is not very aesthetic. Toilet paper is not protected from moisture, this is especially true if the toilet is combined with a bathroom.
Closed holder. The skein is placed inside, its tip remains outside. Top part structures - this is a movable cover, when changing paper, it must be lifted.

Wall mounts include a mobile or quick-fit view. It happens open and closed type... There are quick-release fasteners. For example, it can be suction cups. They have a flaw - they can't stand it heavy weight... The holder quickly moves away from the wall during operation. If the store does not suitable option, which would suit the hostess of the room, you can make an original toilet paper holder with your own hands.

For example, you can sew cool doll or an animal that can be fixed on the shelf. Such a holder is unusual and fulfills its function well. From improvised means, wood or plastic bottle you can make a paper holder that will delight its owner for a long time.

Varieties of floor structures

The floor-standing type is perfect for a spacious bathroom. The floor holder is very convenient because it is close to the person. It can be installed in any convenient place. There are two types of floor-standing type:

View combined with other devices. This is a multifunctional option. The stand provides space for a brush, air freshener or spare rolls. All items are rationally arranged in a rack and are always at hand.
Regular holder. It is rarely used, because a design that includes only toilet paper looks ugly. Multifunctional stands are usually purchased.

The indisputable advantage of the floor holder is the ability to put it in another place if necessary. The structure can be placed in dishwasher to clean up dirt.

Manufacturing materials

Most often, the paper holder is made of metal or plastic. Each of the materials has its own pros and cons. Plastic is a short-lived option: over time, it burns out and deteriorates. This is a fragile option; if handled carelessly, it breaks easily.

Metal holder refers to high class products, its cost is more expensive... Holders are decorated different methods, for example, are plated with chrome, they are coated with brass or copper.

Metal uprights are plated in different shades paints. Therefore, it is easy to choose the design for the interior of the bathroom. Polished stainless steel will last the longest.

Original examples

It is possible to make a construction for toilet paper with your own hands, it will delight its owners and their guests. Now in the store there are many models of various fixtures that can be matched to the style of the room. Any design made with your own hands looks stylish and unusual. Guests will definitely appreciate the imagination of the hosts. For example, the original holder is made of wire. This simple construction is of the open type.

For manufacturing you will need 1 m steel wire with a diameter of 2 mm... The shape of the holder is drawn in advance on paper.

The wire is bent with pliers in advance a certain size... Manufacturing the structure takes a few minutes.

Videotape and plastic bottle

If you need to quickly make a paper holder with your own hands, then it is better to use available tools. These include a plastic bottle. Her Bottom part cut to length paper roll, and the top one serves as a lid. The neck must be cut out. A piece of paper is threaded through the hole from the inside. This option looks original, it will not take a lot of time and money to make it.

The paper holder can be made from an old videotape. A wooden stick is inserted into the cassette slot. The structure is attached to the wall with glue. If desired, the cassette can be coated with any paint color. The holder will fit into any type of interior.

Old skate and wooden jigs

It is very easy to make a skate structure. You need to get rid of the wheels, and hang rolls on their axles. The device will be appreciated by people who love leisure... The design can be beautifully and creatively designed and presented as a gift.

An excellent holder option is structure made of wood... A 20 mm long board is prepared in advance.

You need to fix the crossbar on it and side elements... First, the sidewall is made, then the crossbar.

The advantage of the design is that it is made of natural material... The device looks nice and attractive.

Doll-shaped device

A toilet paper holder is made from fabric, old children's toys or dolls. This option must be attached to the wall. Holders made in the form of dolls create coziness in the room and will always surprise guests.

To make a doll, you need a stretch fabric. light shade, synthetic winterizer or cotton wool for filling, as well as wire, fabric for making doll clothes.

First, the pattern of the product is prepared. Details are cut and stitched together. For the doll, you need to sew a scarf, slippers or a dressing gown. A mouth, eyes and a nose are embroidered on the face.

The last step is stuffing the product. When making clothes for a doll, you can show your imagination. Yarn is commonly used for her hair. When the product is ready, the doll's arms are folded in such a way that a roll of paper is put on them.

Knitted products

Such option will do for knitting lovers. The structure is produced very quickly. It is a cover with a roll of paper inside. Such a paper holder creates cozy atmosphere and is able to attract the attention of guests.

In stores you can find big choice various holders. They are able to transform the toilet beyond recognition. The owner of the premises can choose an original design for himself. When choosing a product, the design of the room, as well as the taste of the owner, is taken into account. If you want to stand out from the rest of the people, then you can make the structure yourself. This model turns out to be original and unique. And the manufacturing process will bring a lot of pleasure.

A toilet paper holder is one of those things that you don't have to buy. Unusual accessories toilets and bathrooms are always eye-catching and don't have to be expensive or overly complicated.

The two photos that you will now see express very simple idea: In order to make a toilet paper holder, you will need, by and large, only a rope and hooks. Or a crossbar and ropes for hanging it. And the choice colors, the combination of materials is yours. Will it be a noble leather with hooks in vintage style or unpretentious cuts of cotton? Swirl around in your inventory - maybe an even more unusual idea comes to your mind?

DIY toilet paper holders

Industrial or rustic style

Even such a seemingly inconspicuous thing as a toilet paper holder can become the center of the whole room and define its appearance, as you will now see for yourself. Both of the following examples are made of things that, if you don't find them at home, can easily be bought at a hardware store with very little money.

Cool Toy Toilet Paper Holder

For example, suppose you have a collection of funny figures or toys at home. Perhaps your child (even if he is already over 40) collects them. From time to time, you throw out especially old specimens or dump them into a corner where they collect dust. So that's it. Better to make a do-it-yourself toilet paper holder out of them!

DIY toilet paper holders from old parts

Or you have accumulated parts from furniture, electrical appliances, a car, etc. See if there’s something in there that ideal way suitable as a toilet paper holder? Most often, the part just needs to be slightly adjusted, painted and fixed on the wall. In the following photos you will see simple designs, which, nevertheless, look very nice and unusual.

Themed Toilet Paper Holders

Let's move on to projects that may require more practical skills and investments than those already considered, but will definitely indicate the hobby of the owner of the house. Is your friend interested in sports and, in particular, skateboarding? This is a great excuse to gift him a themed toilet paper holder. Take your old skateboard and convert the wheels into a holder. Your friend will love it!