The blue fur coat turned yellow than to clean it. What cleaning is suitable for a fur collar? How to care for a fur collar

30.04.2019

A fur coat or hat made of blue mink is a luxurious and expensive thing. That is why its owners want to maximize the life of the product. To help you take care of your favorite thing, I will tell you how to clean blue mink at home.

Mink care at home

In fact, cleaning a fur coat is not so difficult, and you can easily do it yourself, without the help of expensive dry cleaning.

Cleaning methods: 8 options

To clean the fur product yourself, you can use the usual tools at hand, which can be found in almost every home. The main thing is to follow the instructions and the dosages indicated by me.

Photo	Instruction
	Method 1. Hydrogen peroxide If an unpleasant one appeared on a fur coat yellow tint use the following solution: Dilute hydrogen peroxide with water in a ratio of 1:2. soak in liquid foam sponge, press it a little. Handle the product with gentle movements. Hang your coat to dry away from straight lines. sun rays and heat sources.
	Method 2. Semolina clean up mink hat or a fur coat, without harming them, ordinary semolina will help: For each tablespoon of cereal, take a glass of milk. For an average fur coat, you will need 2 tablespoons of semolina. Boil the porridge, wait for it to cool. Apply the mixture to the pile of the product, wait for it to dry (it is best to do the procedure in the evening and leave the item overnight). Remove the remaining grits with a blunt-toothed comb.
	Method 3. Soap solution It can be prepared with liquid soap or neutral shampoo: Soak a clean cloth, sponge, or cotton swab in the solution. Treat the fur with them, wait for it to dry. If necessary, after the procedure, comb the pile with a soft brush.
	Method 4. Wheat bran Refresh fur after long-term storage the following recipe will help: Spread the product on a horizontal surface. Pour the bran into a metal container and heat well. Without waiting for the bran to cool, sprinkle it over the entire surface of the fur coat. Thoroughly clean the fur with a brush, you can even gently vacuum it at low power.
	Method 5. Glycerin Helps not only clean mink coat, but also to give the fur a beautiful shine: Apply some glycerin to cotton pad. Process the product with it from top to bottom.
	Method 6. Ammonia and hydrogen peroxide By using ammonia and peroxides can cope with even the most difficult greasy stains: Mix the components in equal proportions. Spray the liquid with a spray bottle over the problem area. After that, with a cotton swab dipped in clean water, treat the place of contamination. Remove excess moisture with a dry towel.
	Method 7: Potato Starch Another a budget option for cleaning blue mink: Sprinkle a small amount of starch on yellowed areas. Gently rub the mixture into the pile with your hands. Use a soft brush to remove any remaining powder. Pull out the coat carefully.
	Method 8. Alcohol Alcohol can be found in most home first aid kits, and the price for it is affordable for everyone: Mix one tablespoon of alcohol with two tablespoons of water. Soak a cotton pad in the resulting solution, wring it out. Gently wipe the resulting stain. Blot the treated areas with a dry towel. Wait for the fur to dry. If the pile on the fur coat is long, rub it in the direction of the hairs, if it is short, in the opposite direction.

All liquid products prepared with your own hands, you must first check in an inconspicuous area of \u200b\u200bthe product. If the pile reacts normally, then you can proceed to a full processing.

So that the question of how to remove yellowness from a mink coat bothers you much less often, try to follow two simple rules.

Mink coats have long won the hearts of all fashionistas. Moreover, blue mink fur is valued even more because of the special elegance of clothing models from it and the unusual color. Having such a fur coat in their wardrobe, women are interested in how to clean a blue mink. After all, from improper care the fur takes on a yellow tint, and this no longer adds pluses appearance fur outerwear. This article presents the simplest home methods that will help restore the purity of the blue mink.

Original winter female image

Due to the color of outerwear, you should first test the products on an inconspicuous area of \u200b\u200bthe fur coat. This action will help prevent excessive lightening of the fur and its damage. After all, it is a particular blue fur coat that can poorly tolerate even the most gentle cleaning methods.

Before the main manipulations, the clothes are shaken to free them from possible dust and urban debris.

Cleaning with potato starch. Yellowness and dust are the two main problems with blue fur. You can deal with them at home with the help of dry cleaning, which is most gentle on the fur cover of the product. For example, using the usual potato starch, keeping things clean will not be a difficult task.

Soft and comfortable winter wear

The algorithm of actions is as follows:

It is preferable to place the fur coat on a flat plane, fasten all the fastened parts.
Potato starch is sprinkled on a yellowed area or the entire cover with regular cleaning.
With the help of hands, you should carefully rub the fur, as if erasing it.
Next, the thing is qualitatively shaken out, and with a soft clothes brush you need to remove the remnants of the powder. There is also an option to use the vacuum cleaner on the weakest mode so as not to injure clothes. Such scrupulous shaking is necessary to prevent the appearance of moths.

Cleaning with an alcohol solution. Cleaning with an alcohol solution implies the presence of ammonia or medical alcohol in the house. This method very effective not only for saving a fur coat from yellowness and dirt, it also removes stains from cosmetics(lipsticks, foundation etc.).

Alcohol is diluted twice with water to obtain a solution of the required concentration. In the case of a complete cleaning of the product, the solution is poured into a spray bottle and gently sprayed over the surface. If you need to clean a local area, then a cotton swab or disk will come in handy, with which pollution is cleaned with stroking movements.

In this case, a long pile is processed in the direction of hair growth, and sheared or short-haired models are processed in the opposite direction.

The procedure ends with a slight fluffing of the fur and combing it with a comb with rare teeth. After these activities, it is necessary to completely dry the thing.

Beautiful blue mink coat

Hydrogen peroxide as a cleaner. Slightly yellowed fur will tidy up teamwork hydrogen peroxide and ammonia. These components are combined in equal proportions and sent inside the spray gun. A little concentrate is sprayed onto the contaminated area, after which the dirty place is gently wiped with a cotton pad moistened with water. Moisture is removed by blotting with a dry terry or linen towel. Next - drying things under natural conditions.

Application of soap solution. To rid the fur of dirt, cleaning with soapy water is allowed. The solution is prepared by adding a neutral detergent or shampoo to warm water. A cotton cloth or cotton swab is wetted in the prepared solution and the surface of the fur coat is wiped.

In addition, a cotton swab with a solution can be fixed on the teeth of the comb. Fur is processed with combing movements, periodically replacing dirty cotton wool. Then the soapy solution is replaced with plain clean water.

During the procedure, you should be vigilant and prevent the fur from getting wet to the ground. After all, the wet base of the product is capable of shrinking and, after drying, acquire extreme rigidity.

Glycerin treatment. mink fur blue color in the process of wearing it fades a little and acquires a yellow tint. The use of glycerin will help restore color and shine to furs. It softens the pile, saturating and nourishing it with its components. A cotton pad or swab is wetted with glycerin, which is used to wipe the fur surface of the fur coat from top to bottom.

Winter clothes for girls

However, you should not part with such cleaning actions. Twice a season is optimal frequency processing fur with glycerin to maintain a presentable appearance.

Use of table vinegar. There are cases when the fur is not particularly dirty, but there is no attractive sheen that is characteristic of well-groomed fur. Bring back the shine table vinegar, diluted by half with water, which is rubbed hairline things.

Rules for drying and storage in the off-season

After all sorts of wet treatments blue mink needs high-quality drying. Natural conditions most comfortable for her. You can not dry such things near an open fire (fireplace, stove, etc.), heating and heating appliances are also contraindicated for use.

The time when the mink outfit is not used for its intended purpose, he should spend in a linen case in the closet, periodically airing it. Inside the cover, it will not be superfluous to put a means to get rid of moths.

Having figured out how to clean a blue mink, you need to boldly use the knowledge gained and put it into practice. The blue color of the fur is not as scary to care for as it seems. Even at home, you can resume the former attractiveness of a fur coat.

The fur collar is a unique accessory. It not only decorates outerwear, but also protects the fashionista from adverse weather conditions. True, the fur loses its attractiveness very quickly, especially if you do not take care of it at all. Therefore, periodically it is necessary to clean the fur collar at home.

Dust

If a coat or jacket with fur trim for a long time not used and just hung in a closet, they are unlikely to be heavily soiled. However, fine dust could settle between the villi, which must be knocked out. To do this, take a damp sheet and lay it on any horizontal surface. Place outerwear on it so that the fur is at the bottom. Next, tap the collar with a small stick. The fabric will absorb dirt, and the fur part will look like new.

Cleaning the fur will be even easier if your vacuum cleaner has a soft brush attachment. Gently walk her along the pile, turning on the device at minimum power.

10 Ways to Clean Your Fur Collar

In order to bring the fur product in order, use one or more of the following recipes.

Take river sand, sift through a sieve, removing various impurities. Then heat it up and in a circular motion rub into the pile. Leave the collar on for a while to allow the dirt to soak into the sand. Then shake the fur product properly.
For this method you will need hardwood sawdust. Mix them with gasoline and treat the collar with the resulting mixture. When the fuel vapors disappear, remove sawdust from the fur using a soft brush for this purpose.
You will need starch (preferably potato), talc, semolina, or crushed chalk. Use your hands to rub any of the listed products on the fur collar. These substances absorb grease and moisture well, and can even be used to clean light-colored pile. Shake the product periodically during the procedure.
Pour 1 liter of warm, but not hot water and add a tablespoon of any shampoo or dishwashing detergent. Stir until a thick foam forms and treat the contaminated area with the resulting solution. After a quarter of an hour, rinse the fur product in cool water and lay it on a clean cloth to dry.
Pour about 50 grams of salt into a glass and pour in a tablespoon of ammonia. Mix these two components and soak a cotton swab in the resulting mixture, then treat the fur collar with it. After this procedure, wipe the product with a piece of any absorbent cloth, shake well and let dry.
When not too heavy pollution you can use table vinegar. Dilute it with cool water in a ratio of 1:5 and pour it into a spray bottle. Spray the pile vinegar essence finger lightly, and then wipe with a clean cloth. To attractive appearance the collar was kept as long as possible, at the end of the procedure, you can treat it with glycerin in the same way from the spray gun.
Spread the wheat bran evenly on the baking sheet in a not too thick layer. Put in the oven at a temperature of 60-80 degrees. After 5 minutes, remove, mix and sprinkle them with a fur product. Rub the collar in both directions, and then comb gently with a brush.
White fur can be cleaned with a solution consisting of lemon juice and cool water in equal proportions. Wipe the product with a clean cotton fabric giving Special attention dark spots. Next, treat the pile in the same way with a cloth dipped in plain water. Dry.
Dilute soda in medical alcohol(in a ratio of 1:3) and apply in a circular motion with a damp sponge to the pile. After 5-7 minutes, rinse with clean cool water. Now the fur needs to be dried as follows: first wrap it with a dry cloth, squeeze it slightly, then unfold it and lay it on a horizontal surface. This method is best used for fur with a short white pile (for example, rabbit).
If folk methods not to your liking, you can use household chemicals. This does not mean shampoo, but various stain removers. True, they can only be used in the case of unpainted fur. Also be sure to read the instructions and check the expiration date.

If it doesn't come off

Before cleaning, whichever method is chosen, the fur part must be unfastened from clothing. What if it's not possible? In this case, normal washing in the machine using household chemicals e.g. powder or gel. Only gentle programs without spin should be selected. You need to squeeze fluffy products with your hands very carefully, without twisting.

We clean the fur from yellowness

Not only dirt and fat deposits prevent the collar from looking attractive. Light pile can acquire yellowness over time, which spoils the aesthetic appearance of the product.

In some cases, yellowed fur can be saved with hydrogen peroxide diluted in water (one bottle will take about a glass of water). Treat the pile with a cotton swab dipped in liquid. To dry, hang the item in the sun, this will enhance the bleaching effect.

Another option is to use blue. Dilute it with water so that a weak solution of a bluish color is obtained. Treat the pile with liquid using a cotton swab.

To wash the collar, you can use any shampoo, even one that is intended for pets. But it’s not the product itself that should be applied to the pile, but the foam.
If you decide to use an aggressive agent, such as hydrogen peroxide, to clean the collar, first test it on a small and most inconspicuous area. Ideally, use a separate piece of the same fur for testing (usually when buying clothes, it is sewn in a plastic bag from the inside out or to the label).
Karakul cannot be processed with gasoline. With this procedure, the structure of the pile may change.
Machine wash natural fur forbidden. But in the case of artificial pile, the main thing is to look at the label. Allowed in some cases delicate wash without pressing.
Using flour and starch for cleaning, shake them out of the fur with extreme care, or use a vacuum cleaner. The slightest residue of these substances in the pile will attract moths.
Never dry fur products near heating devices (batteries and heaters).
During drying, periodically comb the fur in order to avoid sticking of the villi.
So that the fur product does not have to be cleaned too often, you need not only to wear it carefully, but also store it in a special case.
Even if the collar does not seem dirty, before putting it in the closet for long time(for example, on summer season) handle it weak vinegar solution, as described above.

A soiled fur collar is easiest to take to the dry cleaners. True, this is an expensive pleasure, and hardly anyone will give you a 100% guarantee for the quality of the service.

Try to clean the fur product yourself. Moreover, now you have a whole arsenal of recipes and useful tips for this. All tools are quite inexpensive, in addition, most of them can be easily found in any home.

A real misfortune for every owner of a fur coat made of light mink, polar fox, and so on is a change in the color of your favorite clothes. Ugly yellowish-gray stains on the once snow-white or light beige fur look terrible. What to do with such a thing, especially when you carried it only a couple of seasons? Throwing it out is a pity, altering it will not help get rid of the increasingly manifest yellowness, repainting it is not a fact that it will turn out well. Are there ways to bleach mink products?

Judging by the reviews, there is such a way, and not one. In this article, we will analyze the most popular ways to whiten yellowed fur coats online.

But for starters, it would be useful to find out, why, in fact, did your mink coat turn yellow? After all, this misfortune, unfortunately, can befall both the owner of an elite Italian model made of light mink, and a more democratic Chinese or Greek one.

Incorrect storage. Improper storage of mink is the most common cause color changes. Having taken a fur coat out of the closet after the summer, it was then that the housewives most often discover its deplorable state. So that your light mink does not suffer the same fate, it should be stored either in a special fur refrigerator, or in a cool place in a closet, in a special fur case with anti-moth impregnation. Fur should be cleaned before storage.
The second reason for the occurrence of yellowness is the conditions of wearing the product. Frequent exposure to precipitation, which in the city is sometimes chemical in nature, smog, dust and soot - all this leads to the fact that the mink will quickly and irreparably turn yellow. Also on light fur adversely affected by any cosmetic or perfumes sprayed near or on the product. Therefore, try to carefully wear a light mink coat.

Will dry cleaning cope with yellowness

The owners of yellowed fur coats have an ambiguous opinion about this method. Some ladies argue that a mink that has just begun to turn yellow can be completely updated with dry cleaning. And this is true, only the yellowness should still be quite fresh, barely noticeable. Yes, and dry cleaning should be superbly good. Then this method can help you out. If the fur coat has turned yellow thoroughly, then it may not be taken to dry cleaning - the fur will most likely turn yellow even more from exposure to chemicals.

Home methods for bleaching mink

Let's look at the most popular ways on the net, what can be done if the mink coat has turned yellow.

The most gentle way to get rid of yellowness, and at the same time renew the hole, are various sorbents. For example, such a “cleaning” agent as semolina, starch or bran is popular. The principle of operation is as follows: you lay out a mink coat on a flat surface, after laying a cloth or paper. Then, with intensive movements, apply the sorbent of your choice - chalk, semolina or starch - to the entire area of the fur, and, as it were, rub it into the fur. Next, the product should be thoroughly shaken out, or even combed with a fine brush. The advantages of this method: a gentle effect on the fur with minimal damage to it, a pretty good whitening effect, as you can see in the photo. Cons - some fur remains the same yellow hue, sometimes poorly combed semolina is also added to this, which then begins to crumble when walking and leads to the appearance of moths.
The second most popular method is more effective, but also more dangerous for the fur. Take hydrogen peroxide and dilute it in a ratio of 1 to 1, gently apply it to the fur with a rag or cotton swab - the peroxide brightens the fur well (remember our blondes!). if the yellowness is quite noticeable, you can use ammonia in a ratio of 1 to 2 with water. The principle of application is the same. In both cases, after use, the product does not need to be washed or dried separately. You just need to hang it well and let it dry naturally.
An extreme method is the use of starch diluted with refined gasoline into a light slurry. Such a solution can be used if you have tried all other methods, and they turned out to be useless. The resulting slurry is applied to straightened fur along and across the pile, allowed to dry, and then combed out very carefully with a fine brush or comb for animals.
Not as popular, but no less effective way to bleach the product, if it turned yellow, is the use of bleaching shampoos for animals. There is one thing - fur should never be washed! You just take a few drops of shampoo and dilute it in water. After that, apply the mixture to the fur in the ways already indicated above and let it dry.

If all the above methods do not help you return the original color of the fur, then you should still think about repainting the product. However, keep in mind that this should be done already in a professional studio that works with fur and provides this type of service. If you decide to paint the mink at home, then the result can completely upset you.

White mink products in the process of wearing quickly lose their attractive snow-white shade. Under the influence of factors environment fur acquires yellow which is difficult to get rid of. To mink from yellowness at home, you can independently prepare an effective remedy. As components for bleach, hydrogen peroxide, ammonia, vinegar, blue, lemon acid and other active ingredients, allowing you to quickly restore the original appearance of white fur.

You can clean mink fur at home using dry bleaching methods. For this, substances are used that absorb excess moisture, dirt, and remove dust deposits. As dry bleaches, such gentle components are used as:

semolina;
starch;
talc;
bran;
sawdust.

The main feature of this cleaning technique is that it does not require the use of liquid, so the product will not need to dry.

Semolina

Semolina grains perfectly absorb dirt and also remove dust. For processing, the product should be placed on a table or clean floor. If you need to clean the hat with semolina, you need to put it on a three-liter bottle wrapped in a towel.

To clean the fur with decoy, follow the instructions:

Problem areas are sprinkled with a small amount of semolina.
The entire surface is gently combed with a brush with soft bristles.
After the semolina turns gray, it is removed. If necessary, cleaning can be repeated.

You can remove the semolina by shaking the product, or by vacuuming it. In the latter case, only weak devices should be used.

Gasoline based blends

A mass made from potato starch and gasoline will help to cope with yellowing. Both components are mixed until a porridge-like mass appears. The mixture is distributed over all contaminated areas and left to dry completely. The fur is carefully combed out with a fine-toothed comb. If desired, the applied product can be removed with a low power vacuum cleaner.

Another effective tool are sawdust impregnated with a small amount of gasoline. The resulting product is distributed over the yellowed pile, and then gently rubbed into the product and left for 2 hours. The sawdust is shaken off, and the pile is carefully combed out with a comb.

wheat bran

The fur collar can be cleaned with wheat bran heated to 60 degrees. The product is heated in a clean pan, while it should be stirred regularly. Hot bran is poured in an even layer on the pile, and then gently rubbed into it with a soft brush.

Remove the applied product only after it has completely cooled. To remove small particles of bran, it is necessary to comb the pile with a comb with fine teeth.

Talc, chalk, comb out with a comb

To clean a fur coat or hat from dirt and dust, white talc will help, which is poured in an even layer on the product. The ingredient is gently rubbed into the pile with a brush or fingers. After 2 hours, the talc is shaken off, and its residues are combed out with a special brush.

In a similar way, chalk or potato starch can be used to clean a fur coat or hat. For processing, chalk powder is used, which you can buy or prepare yourself by grinding the bar.

Wet ways to eliminate yellowness

In addition to dry methods to combat yellowing of fur, there are wet methods. They consist in the use of products prepared on the basis of active liquid components. After such cleaning, the fur product should be dried or cleaned of the applied agent with a damp sponge moistened with running water.

Dry the product only natural way hanging it on hangers or on stands. Drying near batteries, other sources of heat or ironing should be completely abandoned, as such exposure can damage the fur.

Hydrogen peroxide and ammonia

Clean up quickly and effectively white fur mink from yellowness can be done with a mixture of hydrogen peroxide and ammonia. To prepare the product, you need to make a solution of 1 teaspoon of a 3% hydrogen peroxide solution and 1 cup of water. 3-5 drops of ammonia are added to the resulting liquid, everything is thoroughly mixed.

It is required to apply bleaching liquid to the fur carefully, using cotton balls. After processing, the product is combed and dried on fresh air. You can hang the product on the balcony, if it is glazed, the window should be slightly opened.

soap solution

There are several ways to clean white fur from yellow plaque with soap solutions. Each of them has its own characteristics.

Pet shampoo can be used as a cleaning agent. The composition of these products includes a blue coloring pigment, which allows you to completely neutralize the yellow tint. The basin is filled with warm water, dissolved in it a small amount of pet shampoo. To enhance the effect, you can add 2 tablespoons of hydrogen peroxide to the solution. The fur product must be carefully treated with a sponge dipped in the prepared product. The sponge should be guided in the direction of the pile. After the procedure, the fur is washed with a damp cloth and dried.
If the yellow tint is unsaturated, you can deal with it with ordinary liquid soap. Detergent must have White color or be transparent. 3 drops of liquid soap are added to a basin of water, the water is thoroughly foamed. Wet a clean sponge with soapy water, squeeze. The pile is wiped several times with a damp sponge, combed and dried.

Liquid soap can be replaced with shampoo or shower gel, which does not include a coloring pigment.

Blue

In this way, not only natural fur, but also artificial fur can be cleaned. Use this tool very carefully, as its excess can lead to the appearance purple hue on the pile.

A small amount of blue is dissolved in the basin so that the liquid acquires a pale blue tint. The resulting composition is poured into a spray bottle. The product is sprayed evenly over the entire fur product. The applied solution does not require rinsing. After processing, the fur is dried and then carefully combed.

Alcohol and salt

To prepare a bleaching liquid, you need to dissolve 1 teaspoon fine salt in glass warm water. IN saline solution add 1 teaspoon of ammonia, mix everything and use for cleansing.

The sponge is moistened in an alcohol solution, and then the entire yellowed surface is treated with it.
The product is dried in the fresh air so that the smell of ammonia is completely eroded.
Complete the procedure by combing the pile.

When removing a faint yellow tint, the use of ammonia can be abandoned by treating the pile with saline.

Vinegar with lemon juice

This product effectively removes yellow spots on the pile. It should be used pointwise, avoiding processing the entire fur product. To prepare the product, you need to mix 1 teaspoon of vinegar and the juice of a quarter of a lemon.

A cotton swab is moistened in the prepared liquid, and then all stains that appear are wiped with it. The yellowness is gently rubbed with a brush with soft bristles, and then the fur is dried.

Any method described will allow you to quickly and effectively eliminate the yellow tint on a product made from mink fur. These agents should be used with great care, avoiding strong mechanical impact on the pile or its excessive wetting with prepared liquids. Otherwise, the fur may lose the attractiveness of its structure, lose its luster. If, during the cleaning process, the hostess did not calculate the amount necessary funds, and the fur product has lost its attractive appearance, you can restore the shine to the pile by wiping it with a 10% glycerin solution.