Crochet a large ball. How beautiful to tie balls into a bunch? How to tie balloons into a garland

18.04.2019

There are many different technologies to decorate the desired room for festive event... But decoration with balls gives more freedom of embodiment. design solutions, creating all kinds decorative elements... In addition, decorating a birthday with their help, wedding events, gives others a whole lot of positive emotions.

You can buy balls in a wide variety of color palette, transparency, different sizes and forms. Buy ready-made or do it yourself, interesting compositions or shapes. Inflating the balloons on your own, a natural question arises - how and how best to do this, how to tie air balloons nice and correct for different compositions.

How can you tie the balls?

There are two ways to tie balloons:

using a thread;
without thread.

In the first case, before tying the tip of the ball, you need a thread about 20 cm long (a longer piece of thread is taken for hanging). Further:

The balloon is inflated, leaving a sufficient tail.
One hand squeezes the body of the “bubble” near the base.
It is twisted several times (from 3 to 5 turns around the axis).
The base is wrapped with thread (about 5 turns), carefully, without damaging the rubber.
The knot is tightened.

The second method allows you to quickly tie the ball into a tight knot and save time. For this you need:

How to inflate the balloon correctly?

When inflating a "bubble", you need to follow a few simple rules:

It is worth inflating so that the shape resembles a drop.
Do not over-breathe too tight - it will burst, ruining the holiday, it can scare the child.
Leave a ponytail long enough for easy tying.

If inflated correctly, the color of the finished balloon should be paler than the non-inflated one.

Blow by mouth a large number of balls, a rather unpleasant process.

For this it is better to use:

The workpiece is put on the pump tube (cylinder). Apply air (gas) and inflate the balloon. The main thing is to observe the tightness and make sure that it comes off the hose.

Another easy way to fill a balloon with air at home:

Composition of balls

To create a composition you will need:

special balls, which are sold in packs of 100 (available in sizes 5; 9; 12 inches);
decorative paper ribbons, fishing line.

The compositions use balls tied simple knot without using threads. To tie them, attach the "bubbles" to each other. Tie the balloons together as shown in the pictures:

When creating compositions for children, you can use so-called "sausage balls" for modeling. They will help to make not only simple round jewelry, but will also add various figures to them.

Basic shapes from balls

The main shapes that you need to be able to do include:

Deuce. Two balls are connected to each other. It turns out an eight, held together by the tips (double knot).

Four. It is performed by twisting two twos. The result is a cross-like shape.

Having learned to knit basic shapes, they start making various designs... By stringing latex air “fours” onto a rope (fishing line), you can form simple or multi-colored garlands of balloons.

A garland of balls

Create more complex compositions.

Composition "Heart"

And adding in the center of the four small ball a different color, get a simple flower.

Simple balloon flower

How to make a flower from round balls

To make a flower you will need:

4-5 round, one-color balls (they will go to the petals);
Balls of a different color and smaller, for the middle.

Flower formation process:

The petals are inflated to the same size;
Two "twos" are connected (if there are 5 petals, the third "bubble" is attached to one of them);
Link together;
In the middle, threading the tail, the center (small ball) is inserted.

This is how it looks in the video:

The finished flower can be tied to a ribbon or planted on a leg of long "sausages":

Such simple, multi-colored decorations will be relevant for any holiday. And with a bouquet made of them, you can please a loved one.

How to tie balloons?

There are several ways to connect balls:

Ponytails, no thread needed. The ends must be twisted. Knit in pairs, using a double knot.

With decorative ribbons. Each big ball snaps to a separate ribbon. Then the ribbons are tied to form a "bouquet".

Fastening to a fishing line (string, frame). In turn, each of the balls is attached to the string at an equal distance (tied with tails).

Using a wire, tying balls already tied in advance.

Handle the wire very carefully to avoid damaging the latex.

Simple ball rolling technique

It is necessary to make figures from special balls (SHDM with a size of 260). For these purposes, you need to master simple techniques twisting:

1) Simple. The ball is twisted several times, creating separate compartments.

2) With a lock. Long balloon twists 4 times in a simple way... The two middle compartments are twisted three times, having previously removed them from the extreme bubbles.

3) With an inflection. The ball folded in half is twisted at the ends. This makes three compartments. One with a loop and one on each end.

Having mastered these techniques, you can start making different funny figures.

Classic balloon dog

The dog is one of the most simple figurines... It is done as follows:

On classic model you can experiment. Make a longer torso and shorter legs. There will be similarities with a dachshund. Changing the muzzle, tied in a different way, the tail - gives the resemblance to a poodle.

How to make a poodle dog from a balloon is shown in the video tutorial:

It took only one ball to make, and the use of the same classic twisting techniques. Thus, by connecting imagination, you can make dogs of various shapes and breeds. Including various fairy-tale characters.

Instructions

Cast on a chain of four chain stitches and close them in a ring with a half-column. Work six single crochets, then work two single crochets into each of the previous rows. This will add stitches to create twelve single crochets.

In the next row, add loops through one column. Knit one single crochet in one loop, and in the next loop knit two single crochets at once. Alternate single crochet stitches with double crochet stitches for a row of eighteen single crochets.

On the next row, continue adding stitches to make twenty-four single crochets, and then knit another row of thirty single crochets, adding stitches across three crochets. Tie five rows without increments - you will notice that the fabric begins to taper.

After the fifth row, start decreasing the stitches - knit three single crochets, skip one stitch, and then knit one single crochet. Continue alternating stitches until you have 24 single crochets. In the next row, continue decreasing sts one by one to get 18 stitches.

In the next row, subtract the loops to 12 columns. In the very last row you should get six single crochets.

Sources:

Crochet How to knit a ball Lesson 294 How to

Knitted balls can be used for various purposes. Depending on the color and size, they can become Christmas tree decorations or just entertainment for children: an apple, an orange or a bun.

Instructions

Tie a chain of four chain stitches and connect the chain into a ring with a connecting post. End each row with a connecting post, uniting the rows and start with 1 air lift loop.

1 row. As you insert the hook into the center of the ring, knit 6 single crochets. Mark with a thread contrasting color the beginning of the next row. End each next row with a connecting post, combining the rows and start with 1 air lifting loop.

2 row. Work 12 single crochets. That is, make an increase: over each column of the previous row, knit two single crochets.

3 row. Alternate one single crochet and two single crochets over one of the previous row. Thus, in this row, you should get 18 single crochets.

4 row. Alternate between two regular single crochets and two double crochets. The result should be 24 columns.

5 row. Alternate between three regular single crochets and two double crochets. In total, there should be 30 columns in this row.

6-10 rows. Knit without adding, that is, 30 columns in each row.

The 11th and following rows are knitted with decreases. To decrease, knit a single crochet, grabbing not one, but two loops of the previous row. In the 11th row, alternate 3 regular stitches and 2 single crochet with a decrease (24 stitches in total).

12 row. Alternate between 2 regular single crochets and 2 down crochets for a total of 18 crochets. After knitting this or the next rows, it is most convenient to insert a filler into the ball: holofiber, synthetic winterizer.

Row 13. Alternate 2 regular stitches and 1 stitch decreasing (12 stitches in total).

Row 14. Alternate 1 regular column and 1 decreasing column (6 columns).

Pull the thread through the remaining loops in the row and tighten.

In crocheting, there are many patterns and products that require decreasing the loops - these are mittens, socks, scarves, hats, backs, shelves, sleeves of pullovers and sweaters, and much more. Decreasing loops in knitted fabric decreases it, and adding increases it.

Instructions

If you have already knitted a row, and then you need to subtract a few stitches, knit them with single crochets, then continue the stitches of the pattern until a certain one in the row - so that at the end there are as many unconnected stitches as you subtracted at the beginning of the row. To smooth out uneven edge remaining from decreasing the loops, tie it later with single crochets.

If the loops need to be reduced not at the beginning, but in the middle knitted details, knit two stitches together in one row, passing an equal number of loops between them. For example, after one or two loops, knit the posts, not as usual, but in the amount of two. To do this, insert the hook into the loop and pull the caught thread through the loop. Then insert the hook into the next loop and pick up the thread again, then pull it through the loop. Knit together the three loops that were on your hook after the actions performed. Continue decreasing stitches in this way until there is a row.

Another method of decreasing the loops is to knit the posts through one loop. Skipping every second loop in you, thereby, reduce the number of loops and narrow the canvas. This method is faster than the previous one and for large, time-consuming investments.

Related Videos

note

To obtain this shape, you will need to add or subtract loops and columns of the pattern. Decrease the loops in the middle of the part. Knit in one row, two columns together through the same number of columns and through one or more rows of the pattern. The hook is inserted into the loop of the lower row, the thread is picked up, pulled through the loop and left untied on the hook.

Helpful advice

For high-quality crocheting of garments and other things, it is necessary to study several ways to add and subtract loops in a knitted fabric. Adding a loop inside the row. Knit two stitches in one loop of the bottom row. Method 2: Between two columns, cast on one air loop, into which in the next row, knit an additional column. Simple decrease of the loops around the edge.

Sources:

decrease loops when crocheting

Smeshariki are the favorites of many children. These adorable cartoon characters are fun and beautiful, and their adventures are exciting. Please your baby: give him a tied smesharik, for example, Nyusha.

You will need

- hook;
- filler;
- yarn of pink, red, crimson, black and white;
- wire;
- scissors;
- a needle.

Instructions

Tie the torso. First, make two chain stitches and close them in a ring, then knit six single crochet stitches. From the second to the ninth row, knit according to the scheme: that is, knit two single crochets in the interval of the single crochets of the previous row, then continue to knit single crochets, the number of which is determined according to the scheme.

From the tenth to the eighteenth row, knit without increments: knit 54 single crochet. In the nineteenth row, start knitting with red thread, making a small parting in the face with pink thread (9 single crochets). There should be a total of 54 single crochets in this row. From the twentieth row, start a sequential decrease in the number of knitted loops: 20 row - 48 single crochet, 21 row - 42 single crochet, 22 row - 36 single crochet, 23 row - 30 single crochet, 24 row - 24 single crochet, 25 row - 18 single crochet.

Then stuff the torso with some sealant. Continue knitting the torso: row 26 - 12 single crochet, row 27 - 6 single crochet, row 28 - 3 single crochet. Then pull the three remaining loops together by bringing them together.

Tie the legs. Cast on two stitches and tie them into a ring, then knit 6 single crochets. Rows 2-12 - 12 single crochets. Cut a wire about 7 centimeters long and wrap it with insulation, and rewind it with thread from above. Insert the wire into the tied leg (rounded end down, and stick the sharp end of the wire into the torso) and sew the leg to the torso. Do the same operation with the second leg.

Tie the handles. Knit as well as legs. The only difference is that there will be not twelve, but ten rows. Then insert a wire wrapped with insulation and fastened with a thread (with a sharp end to the body) into the handle and sew it. In the same way, knit the second handle and sew.

Tie a patch. Cast on 2 stitches, which are closed in a ring and knit 6 single crochet. 2 row - 12 single crochet, 3-5 rows - 18 single crochet. Then cut off the thread, fill the patch from the inside with padding polyester and sew it on, embroidering the nostrils with red thread.

Tie the ears. Cast on five stitches, then single crochet into the second loop from the hook. Then knit 3 single crochets, five single crochets in one loop, 3 single crochets, 4 single crochets in the starting loop. Then cut off the thread. Tie the second eyelet in the same way and sew them on.

Tie your eyes. Cast on 2 stitches and close them in a ring, then knit 6 single crochet stitches. The second row will have 12 single crochet stitches, and the third row will have 18. In the same way, knit the second eye.

Tie the pupils. Cast on two air loops with black thread, which connect into a ring. Then knit 10 single crochets. Break off the thread. Then pull a white thread through the center of the pupil twice (this will add sparkle to the eyes). Tie the second pupil.

Tie a flower that will be sewn to the braid. Cast on 4 air loops with white thread, which close into a ring. Then knit one single crochet and five stitches (repeat five times). In the second row, in each arch linked in the previous row, knit 1 single crochet, 1 half crochet, 1 double crochet, 1 double crochet, 1 double crochet, 1 double crochet (repeat five times). Break off the thread.

Assemble the separately tied items.

note

Pay attention to the build quality!

Helpful advice

Make your hair from a red woolen thread, which you fasten at the top of your head, and then weave braids from it.

Sources:

Knitted smeshariki: Nyusha. Knitting description

If you still have old Christmas trees balloons, from which the paint has already been erased, do not rush to throw them away. With a crochet hook and a metallized thread, not very pretty christmas toy can turn into exquisite decoration self made.

You will need

- a ball with a diameter of 10 cm;
- metallized thread - 100 m;
- hook number 1;
- beads, rhinestones.

Instructions

For tying, you can take transparent or colored balloons... If paint falls off, gently wipe the toy down to the glass. Don't press too hard - usually Christmas decorations rather fragile. Check the ball for cracks or chips. If there are any, it is better to pick up another copy.

Knit the motif according to the pattern. The dots correspond to the air loops, the dashes to the columns. Crossed dashes are single crochet stitches. A droplet is a pico of 4 air loops. Cast on 8 air loops and connect them in a ring. Replace the first loop of each circle with the number of air loops indicated in the diagram with a number. Close each circle with a tight fastening loop. Try it on a ball as you complete the work. If the strapping is loose, reduce the number of air loops in the arcs. As a result, you should end up with one bowl-shaped half.

Complete the second part. Tie another half in the same way. Knitting the tenth row, connect the two halves of the product by placing a ball between them. Fasten in small arcs of air loops (3 air loops) between the posts. Instead of two loops in these arcs, make one bartack with the arc of the second cup-shaped half.

In order to hang the toy on the tree, tie a chain of air loops. Pass it through the hole in the holder, loop and secure.

Flowers from balloons

To create the petals and the center of the flower, you need balls different shades... We will tie the balls using their tails. If you will be working on your own, then first fix the ends of the balls with a knot or on a thread.

Petals

All elements must be of equal size, otherwise the flower will be ugly. Inflate a couple of balloons and tie them by the tails into two knots. Do the second "two" in the same way. Twist the pairs. Adjust the composition so that all the balls are in the same plane.

Middle

Take one ball of contrasting color. Inflate it so that the diameter of the bubble is less diameter"Petals". Tie the element to the finished four by tying the ponytails. Place the balloon on top of the petals, in the middle.

The flower is ready!

How to tie balloons into a garland?

Depending on what result you want to get, choose balls of the same tone or multi-colored. To tie the elements of the garland together, you need a thread - a thin twine, a narrow decorative packing tape and so on. You can take a thin line, but you have to work with it carefully so as not to damage the balls.

Inflate two balloons and tie them by the tails.
Make a second similar "two".
Twist two pairs into a four. All balls must be in the same plane!
Make the required number of "fours" - of which we will add the garland.
Take the first "four". Tie the end of the string / tape where the balls meet.
Place the second garland element on top. Check that the balls are symmetrical in relation to each other. Tie a new four to the existing one with a secured thread.
Place the next piece on top, check the symmetry and rewind the piece.
In this way, fold the garland to the desired length.

Here you can buy balls of any shape, color and texture from the best manufacturers the world. In stock varied colors, there are already ready-made sets... We will delight you with pleasant prices, bonus offers, convenient conditions payment and delivery.

In this article, we will tell you in detail how to beautifully tie balloons together, what techniques you can use to properly bind balloons into a bunch.

One balloon is good. But a lot of balls is even better. Especially if they are beautifully assembled, although the pile of balls scattered on the floor also has its own charm. For your holiday, you can order balloons with delivery and experts will bring you decorations in the form in which you just want. But if you have a lot of time before the celebration, you can tie the balls yourself beautifully and effectively.

How to tie balloons together?

The most important rule: balls are connected in pairs. That is, one bundle is two balls. But these bundles can already be combined into fours - flowers are obtained, however, without cores. However, inflating a smaller balloon and attaching it in the middle is not difficult. By the way, this was the first version of the beautiful ball tying.

The second option is classic garland... It is also done on the basis of fours. To create a garland, you will need more thin ribbon or twine.

So, the garland is done like this:

We take the first four, we tie the end of the ribbon to its middle.
We take the second four, apply it to the first - so that the balls are located symmetrically relative to each other.
Secure the four with tape, also in the middle.
Let's take the third "flower" ... Etc.

Everything is very simple, and the garland turns out to be spectacular, especially if you take balls of different colors.

How beautiful to tie balls into a bunch?

Sometimes you want to make not flowers or a garland, but just a beautiful, large pile of balls. And how to tie the balls together in a bunch so that it really is beautiful? To do this, you will need a lot of tape, because you will need to tie a long tail to each ball. The length of the tails should be different - from the largest and less and less. So that the balls in the "heap" are in rows, one above the other. Then the whole bunch will look more impressive and voluminous. So you can make a bundle for launching balls into the sky or a "fountain", which is installed on festive table or near walls, columns. And so that the "fountain" does not fly away, a load is tied at the bottom of the tail.

To create a long bundle, ribbons are tied to a string, at equal distances - this decor looks spectacular in the form of columns tending upward or large arches.

Here are the basic tricks on how to tie balls together in a bunch to make it beautiful and truly festive. And if you want to save time and effort, then it's easier to order ready-made decor by choosing balls in the online store. After all, organizing a celebration is a lot of trouble, why burden yourself with another one? It will be better if you and your guests admire the result of the decorators' work - beautiful garlands and bundles of balls.

The press release was prepared by the Mechtalion.ru website.

At sight hot air balloon there is an anticipation of the holiday. And the composition of such elements is doubly delighted. We will learn about the secrets of creating such an attractive and elegant decor for decorating a family celebration in more detail. After all, repeating such a technique yourself is much easier than it seems at first glance.

How beautiful to tie balls

Let's start with a description of the basic accessories that will come in handy in the work. It is important to decide on the material of the composition - balls. People with experience in creating such structures prefer to acquire special kits... The ready-made kit contains 1000 pieces for modeling. The diameter of such products is of three types:

5"";

9"";

12"".

Moreover, when choosing a material, the masters talk about the advantages of latex. To please the result of a test aerodesign, get medium-sized balls - it's easier to hold such elements together. Pay attention to the texture and color of the set. The following classes are distinguished here:

translucent models "Crystal";

items with a mother-of-pearl shimmer "Metallic";

matte Pastel decor.

In addition, you need to stock up on a pump to inflate the links of the future decor, colored ribbons, fishing line and other components as desired. The masters recommend tying the inflated element with a knot - this technique reduces the time by preparatory stage... After completing the necessary formalities, it is time to move on to the creative process.

Attention!
For a strong connection, the details of the general idea are appropriate to tie in pairs. This technique guarantees a reliable and simple "foundation" of the composition.

If we apply the method of twisting in pairs, designers achieve additional forms: "Fours" and "crosses". Such options for blanks are used when weaving arches, posts or garlands. As for technology, the following types are distinguished here:

Pair.

The technology is described above and involves the mutual attachment of the tails of 2 balls.

Fastening to the tape.

In this case, ribbons are tied to the blanks. different lengths... The second step is tying the elements together. Due to such a connection,get a beautiful and original composition.

Fixing on the line.

The base mount is pulled across the room. It is important here to firmly secure the ends of the thread. The next step involves tying the blanks themselves to the fishing line. Additional decor will give this design a special charm.

In addition, original volumetric objects can be made from the prepared paired elements. A simple example a similar decor becomes a "flower". We offer step by step instructions creating a ready-made bouquet for 3 daisies:

make 12 pairs of large diameter matte white balls twisted together;

inflate 3 small yellow balloons;

we connect ready-made pairs into "fours";

we fix the yellow elements in the center of the structure.

The result is three flowers, which we attach to long balls Green colour. In this case, it is appropriate to decorate the twisting points with a ribbon.

According to a similar principle, it will be possible to create objects of any class, which will be prompted by imagination. However, for people who have not yet "filled" their hand, it is appropriate to start with simple and easy forms.

How to tie a garland from balls

Arches, columns and conventional hanging compositions benefit from volume and unusual kind... To make such a construction, you need to apply a basic knowledge of mathematics. For 1 meter of finished garland we buy:

with a diameter of 5 "balls - 40 pieces per 10 bundles;

9 "circumference - 28 pcs. for 7 blanks;

size 12 "- 24 pieces for 6" fours ".

The string will become the axis of the future composition. In this case, the footage of the line is the length of the future product with the addition of a stock of 3 m. If the balls are planned to be filled with inert gas, stock up on the load. A ball filled with water is suitable as a sinker. This technique will hold the structure in place.

The methodology for performing the work assumes the following sequence:

preparation of elements;

tying a pair of ponytails;

twisting of paired blanks into "fours";

pulling the axis through the center of the balls;

attaching the next workpiece.

At the preparatory stage, we observe the dimensions inflated balloons... Here they practice creating a modular hole, the diameter of which corresponds to the workpiece.

To securely fix the structure based on the master, it is advised to unwind 2 balls, draw a ribbon or fishing line between them, and then swap both elements in the clockwise direction.

Important!
While assembling the structure, make sure that each "four" took the required position. Subsequent movement of the blanks will damage individual elements and rework the composition.

Any design acts as a decoration for the base of the garland. Flowers are appropriate here, the creation technology of which was mentioned above, or ordinary bundles on ribbons of different lengths. In a word, the implementation of such an idea - creative process... As a result, the novice master will delight both himself and his loved ones.