Butterfly pattern of plastic bottle. Butterfly from plastic bottle with their own hands - photo, video how to do. Original and bright flower beds in the garden from plastic bottles with their own hands

08.04.2019

Each of us is at home there are plastic bottles that we are going to throw out. However, do not rush to do it, because they can be used. For example, make butterflies that can decorate anyone.

DIY "Butterflies" with their own hands made of plastic bottles

Before making a butterfly from plastic bottle It is necessary to prepare the following materials:

several plastic bottles;
paper format A4;
scissors;
nail polish: brown, silver;
sequins;
red gel pen;
pebbles;
stencil butterflies.

Before you need to prepare a bottle: rinse it with soap, free from the label and dry.
On a sheet of paper, print the stencil of butterflies, then apply it to the bottle.
With the help of a gel handle, we supply the stencil along the contour.

Scissors cut the resulting butterfly.

The butterfly turned out to be curved wings down.

It is necessary to bend the butterfly so that the wings look up.
Gel handle draw all the details on the butterfly as on the stencil.

Silver varnish are missing the middle of the butterfly and draw contour.
Sprinkle with butterfly and mustache sprinkle.

We start drawing all the details of the butterfly that were drawn gel handle. We do it with the help of silver varnish.

Along the edge of the wings, we put small points.
On silver varnish, which painted the contour of the wings, draw small points with brown varnish.

We take the varnish of any color, dripping a few drops on the butterfly calorie and glue the pebbles. Butterfly is finally ready.

Similarly, you can paint another butterfly, but make it one-color and not stick to her pebbles.

Thus, we had two butterflies made from plastic bottle and painted ordinary varnish For nails.

There is another option to create butterflies from plastic, which can be painted with stained glass paints. In the first version, we first painted the butterfly outline on the bottle, cut out and only then painted. The second option involves drawing and coloring the butterfly immediately on the bottle before it needs to be cut. It is necessary to prepare materials:

paper;
plastic bottles;
stained glass paints;
scissors;
leske or wire;
small beads;
awl.

In order for you to get a butterfly from a plastic bottle, you can use a large number of Butterfly templates.

With such butterflies from plastic, you can decorate the curtains if on the back side of the butterfly to attach a needle or pin. Such a room decoration will create comfort and remind about summer days. If on reverse side Butterflies stick a small magnet, then a wonderful magnet on the refrigerator will be. Such a butterfly made by hand can be used as

Each hostess will come up with these butterflies to use: on curtains, easter baskets, packaging for gifts ...

I'm talking without translation. It describes the paints that can paint butterflies. What can I use:

Disk marker;

Various baubles for manicures are brinets, pebbles, sands ... What is enough fantasy, money, desire.

We choose the butterfly pattern, apply from the inside and contours to the marker. Cut out small scissors, we carefully fold in half (so as not to burst plastic!). Blank for painting is ready!

Here each decides on herself as paints the butterfly. I recommend in the art department to purchase contour paint. It will make your butterfly even more. Good luck!

And here are the templates, as can be seen, not only butterflies.

Plastic Bottle Lace Butterfly

Materials:
Paper, ruler, pencil, scissors, felt-tumbler;
Transparent plastic bottle;
A piece of white lace fabric;
Beads and beads;
Waterproof transparent glue

1. Draw on wings paper. To do this, first of all, in the middle of the sheet, with the help of a ruler and pencil, draw three lines: one - central, two - lateral, retreating from the central line 3mm.

2. On the left side, in contact with the side line, draw the butterfly wing. Use the rubber band, redraw as long as you get such a ward that will satisfy you. Well, if you come from the first time.

3. Now lean the line to the center line and bend the paper in half. Then bend it on this bending in the other direction, so that we can draw the second wing on the same side as the first, leaning the paper to the window.

4. As a result, we get two absolutely identical wings.

5. Draw a torso.

6. Now cut out our paper butterfly.

7. For the next our step, we need a transparent plastic bottle. Cut out a piece of plastic, great enough to fit all our paper butterfly when we lean it. The paper must be secured by scotching from all sides so that the butterfly does not slide until we circle the contour on the plastic.

8. Now that we securely secured the paper butterfly to the plastic, you can circuit with an outline with a marker.

9. Cut our plastic butterfly. I cut out small manicure scissors, thanks to which you can carefully cut the butterfly in all complex places.

10. Dots I marked the bending line of wings, previously called side lines. Leaning the line K. point line, neatly, not cracked plastic, bend the wings. Thanks to this plastic butterfly will be volumetric.

11. Now proceed to the most interesting. We'll need us now lace fabric and glue.

12. We apply glue to the ward, lean the fabric so that the lace is on the tip of the wing. We are waiting a few minutes to complete drying. Then with manicure scissors cut the excess cloth on the plastic circuit of the wing. The same is done with the second wing, covering the torso cloth of the future butterfly.

13. Well, that moment came when it is necessary to put your fantasy into action. Here we will need only glue, beads and beads. The glue can be applied directly on the wing of wide layers, or droplets and instantly pour out from the palm, or lay out the beads and beads tweezers. After a few minutes, the layer of adhesive dries, reliably clinging to him all that you appline it.

14. Try to pick a bead from one color scheme, or one color, but different shadesthen your butterfly will look harmonious. A mustache can be cut from the remnants of a plastic bottle in the form of thin strips, glue them to the plastic base before applying beads. And to fasten two small beads to the tips of the mustache. There are such a butterfly. Due to the fact that it was created using sufficiently persistent materials, it can be used for various purposes: decoration for floral vases, hairpin, a fridge magnet and even scenery for sandwichees.

These amazing butterflies can be made by plastic bottles. Plastic bottle butterflies can become wonderful new Year's toys For your Christmas tree, finishing new Year's masks or carnival costume, decoration of packaging for a gift, etc.

You need for a plastic bottle butterfly:
Empty transparent plastic bottle (1.5-2 liter, with equal cylindrical sides).
Stained glass paints or acrylic paints "Metallic". All this can be replaced with a gouache, diluted with PVA glue - will not be bright there, but much cheaper.
Scissors;
Beads or beads;
Sequins, sequins;
Wire.

How to make a plastic bottle butterfly.

1. To begin with, draw the butterfly sketch. You can use the proposed templates or draw your own author's drawing on the sheet.

Templates can increase or decrease if necessary - the greater the bottle, the more butterfly can do.

2. To transfer the prepared sketch with paper sheet on plastic, cut off top Bottles to an even cylinder, insert the sheet inside the sheet and fasten with a scotch or paper. Circle contours feltster.

3. Color the butterflies. First apply the contour lines, then fill the middle of each site and leave until the paint is completely drying. Now you can quarrel sections thin layer PVA glue and spray with sparkles or apply a special 3D gel with sparkles. Again let the decoration dry.

4. After all the paint dried, cut the butterflies along the contour.

5. Carefully bend the butterfly wings along the contour of the body. Now the butterfly of plastic bottles acquires the desired shape.

6. For the body, we will need beads of different sizes and wires for beads. Slide the beads on the wire and secure the prepared torso on the basis of the butterfly in the holes in advance made by a seboard.

Here are ready fabulous butterflies from a plastic bottle. You can not only decorate new Year's celebration - Such a butterfly can "sit down" on the tulle at the window or flower on the wallpaper with a vegetable pattern; A flock of butterflies slowly "fly" under the chandelier. If you glue a small magnet from below, the butterfly will be on the refrigerator. Further think up yourself.

Video How to make a butterfly from a plastic bottle.

Create beauty with your own hands, rejoice your own results and delight those who are next to you!

In order to decorate flower arrangements or potted plants, you do not need to buy expensive decorative elements. They are quite capable of replacing a plastic bottle butterfly. With its help, the summer will always shove wings on the curtain or refrigerator.

Master Class: Plastic Bottle Butterfly

1. Prepare materials and tools

Based on the size and main shade of the butterfly, select the appropriate container. The drawing should fit on the bottle surface entirely. You will also need paper for the template or clipping pattern itself. In the process of processing the workpiece, you will need: sharp small scissors, candle or matches, sewer. To apply the template - alcohol, waterproof marker. For decor - Nail polish ordinary and with sequins (or acrylic stained glass paints), rhinestones, sequins, beads, magnet, beads, thin brush, colorless glue or glitter glitter, thin wire.

2. Preparation of template and blanks

Today there are a lot of templates, it remains only to choose the butterfly option that you can draw and cut. Novice is better to fill hand on models with simple pattern Wings, and after switching to more refined images. Try to choose symmetrical drawings, such butterflies look more beautiful asymmetric.

Cut blanks can be from the container of any color and size. But it is better, for example, to make green butterflies from green bottles, otherwise you will have to spend much more varnish to mask the original shade. Before carrying a drawing to the container, you need to clean it well from traces of labels or other contaminants. After the neck is cut and the bottom of the bottle, so that it turns out a flat side surface without protrusions or grooves. Now it is necessary to find a place where the seam of a plastic bottle is passed. It is this line will become a middle of the butterfly and will allow you to get the natural bending of the wings. Cut the bottle in a place opposite to the seam and spread the workpiece on the table for straightening. So that the marker and varnish lay well, it is better to wipe the surface with alcohol.

3. Transfer template on plastic

To do this, it is necessary to put a drawing for transparent plastic and circling the line with a waterproof marker. Do not forget to combine the middle of the abdomen butterfly and bottle of seam. To make the image to be smooth and clear, secure it on a bottle using bilateral scotch. Now it is necessary to carefully cut into not to break the plastic, but after getting into the opposite direction of the wing. A small hint: Draw an absolutely smooth extended abdomen, it will facilitate the bending of the wings. Walk to a hot selection of cuts so that they are slightly melted.

4. Decorating the workpiece

The decor process depends only from the imagination of the butterfly owner. But in any case, before decorating the model with rhinestones, beads, pearls or sparkles, it is necessary to provide a flat painted coating. First, it is necessary to draw all the drawing lines with gold or black contour. After acrylic paints or unnecessary nail polish (cheaper option) you need to cry twice facial Butterflies. And both times wait for paint. After you can apply clear nail polish With sequins or use glitter glitter. If necessary, repeat the contour with sparkles. The abdomen often decorate beads. The back side of the butterfly is also needed to paint, for example, a waterproof black marker, so as not to weight it with an additional layer of paint. From wire or plastic you can cut the mustache and fasten them on the head of the insect. On the back side of the abdomen you can glue a double-sided tape or a magnet, then the butterfly can be attached to a room plant, a wall or refrigerator.

Such beauties may be born within just a few hours. So show a little imagination and perseverance, and a plastic bottle butterfly will forever settle in your home or garden.

These cute, gentle, weightless butterflies are made of a conventional plastic bottle, which we usually throw in trash. Motillas can become an unusual decor decor of any subject.

They can be decorated with a wall or a chart, place on the bedside table or refrigerator, attach to the mirror or glass, give the originality of glasses or a bottle of festive wine.

Today we will learn to make such multicolored butterflies.

The process of manufacturing butterflies from a plastic bottle is quite simple and delivers a lot of pleasure. Not only hands, but also fantasy, manifests artistic taste. As a result, each butterfly turns out special and unique. Well, let's make it together?

Items and materials that we need:

Transparent plastic bottle of any diameter
Scissors
Marker or Flomaster
Butterfly layout
Alcohol
Acrylic colored paints
Acrylic colorless lacquer
Fishing Line or Thin Wire
Decorative powder, beads, sequins

Plastic bottle butterfly manufacturing process

1.1. Sut off the bottle of the upper and lower parts.

1.2 We cut the obtained cylinder on one side along the axis.

2. We deploy the prepared plastic, we apply a butterfly layout to it and supply it with a marker.

3. On the circuit circuit, cut out a butterfly.
4. We make bends at the base of the wings, separating them from the body.
5. Degrease the surface of the butterfly with a tampon dipped in alcohol. This will provide high-quality staining, as well as clean the surface from traces of the marker.

6. Decrade the butterfly with colored acrylic paints, let it dry, and we open with colorless acrylic varnish.

7. We form from a pre-painted fishing line or thin wire mustache for a butterfly. Then glue them with acrylic varnish To the base of the body from the reverse side.

8. The finished butterfly can be finished with beads, sequins or decorative powder.

How to attach a butterfly to the subject

Attach a butterfly to a tissue basis using a pin. To do this, stick to the bottom of the abdomen a small piece of foam or fabric. For mounting butterflies on a flat surface it is best to use double-sided tape.

That's all.

Useful pastime to you!

Beautiful and elegant decoration for any children's room is a plastic bottle butterflies. It is simple to make them enough. It is the procedure for making such a craft that will be set forth in this small article. Moreover, this order is universal, and with it you can make any crafts from plastic bottles (butterflies - no exception).

What do you need?

Before making a plastic bottle butterfly, we will deal with the fact that we need to need during the work. First of all, this is a plastic bottle. It is selecting its size on the basis of which will be the ultimate craft. For example, to create a large butterfly, it is better to use 2- or 3-liter containers, but for small, there will be enough tank in 0.5 liters. Also during the work we need a black marker. With it, it is convenient to place the workpiece. Do not forget the scissors with which we will cut the marked butterfly from plastic Tara. Also, when performing some operations in the process of making a craft, it is recommended to use a knife instead of scissors (for example, when cutting the neck and bottom of the container). Do not forget about precautionary measures and try to perform all operations as accurately as possible to eliminate possible injuries. For registration properly finite result, it is recommended to use acrylic paints. As a last resort, for decoration you can use a set of colored paper or bright cuts from glossy magazines. In the latter case, you will have to use glue, in order to glue paper or cut to the butterfly surface. And in the process of work will have to use a sheet dense paper. It is necessary to print the template using the printer using the printer, which will continue cut and moved to the surface of the plastic bottle.

Templates

Option One - We make butterfly patterns on their own. For this tight sheet of paper necessary sizes (for example, Watman) bend in half. Near the bending draw half of the butterfly. Then, not flexing the sheet, cut out the template. Option second - download already ready templates Butterflies from the global web and print on the printer. Next, cut out the prepared workpiece. In the first case, we get a purely individual craft, but it will have to spend much more time to spend on its manufacture. In the second case, the process of creating a butterfly will be significantly shorter, but it will not be able to boast of particular individuality.

Preparation of plastic bottle and template transfer on its surface

Next, the finished patterns are applied to the surface of the plastic bottle and are shown using a marker. Then it is necessary to cut down the bottom and the neck of the plastic container using a knife (do not forget about careful execution of this operation). We also try to do as much as much as possible: the marker applied by the marker should not be injured. If neatly it did not work out to cut the bottle, then summarize the cut line. The remaining cylindrical part of the tank is neatly cut in a straight line so that the sheet turns out.

Cut out

In the next step, we already cut the butterfly from a plastic bottle. With their own hands and scissors, carefully pass each line caused by the marker at the previous stage. Do not rush and carefully cut out each workpiece. You also need to be attentive during this operation. One irregular movement with scissors - and the aircraft is spoiled. So that this does not happen, we make short-term breaks during the work. It will also be predetermined to determine the easiest and convenient way cutting blanks.

Decorated

Next, you need to paint and arrange made by plastic bottle butterflies. Do it yourself not to do it of great difficulty. We invent the drawing of the butterfly in advance. Then each color is gradually applied to its surface. To different colors Not mixed with each other, it is necessary to pause for 20-30 minutes after applying the next shade. Also during the work, you can use any remedies, such as beads or decorations. This will make the final craft more unusual. If there are no paints, then they can be replaced with colored paper or cuts from glossy magazine. In this case, we draw each element of the decoration, cut it out and stick on the butterfly surface with glue. Again, do not forget to take pauses, in order for the glue to succeed properly to dry. At the end, there is already almost ready-made butterfly to open in stages and give it the opportunity to dry. This will make it much longer to maintain its original condition.

Fastening

It is not quite interesting if the butterfly will just lie on the table or some other place and dust. Therefore, it is recommended to come up with some unusual mount for a butterfly from a plastic bottle. It is not much difficult to make it with your own hands. The easiest way is to use thread or rope. The first solution is more preferable: so it will be the impression that the butterfly carries in the air. Another option is with the help of glue to fix the craft on some vertical surface (for example, doors or wall). Another creative option Placing such a butterfly in the room is the use of a magnet. On the one hand, it is attached to the butterfly with the help of glue coin (it should obligatory Magnetic). And then, for example, a magnet is applied to the curtain, and on the other hand, the butterfly. Another fastening is a wire. In this case, one end with the use of glue is fixed on the butterfly, and the second is on some solid, but moving surface (for example, doors). As a result, when the surface moves, the butterfly will be like a "soar" in the air. At the same time, after the door stops, the handicraft will still vibrate in space.

Let's summarize

This article shows a simple and available way how a plastic bottle butterfly can be made. The master class is simple enough, and it is even forces to those who have never been involved. So we turn on the fantasy and make bright and unusual crafts from plastic bottles.

What do you need?

Before making a plastic bottle butterfly, we will deal with the fact that we need to need during the work. First of all, this is a plastic bottle. It is selecting its size on the basis of which will be the ultimate craft. For example, to create a large butterfly, it is better to use 2- or 3-liter containers, but for small, there will be enough tank in 0.5 liters. Also during the work we need a black marker. With it, it is convenient to place the workpiece. Do not forget the scissors with the help of which we will cut the plastic container marked butterfly. Also, when performing some operations in the process of making a craft, it is recommended to use a knife instead of scissors (for example, when cutting the neck and bottom of the container). Do not forget about precautionary measures and try to perform all operations as accurately as possible to eliminate possible injuries. For registration properly finite result, it is recommended to use acrylic paints. As a last resort, for decoration you can use a set of colored paper or bright cuts from glossy magazines. In the latter case, you will have to use glue, in order to glue paper or cut to the butterfly surface. And during the work, a tight paper sheet will have to use. It is necessary to print the template using the printer using the printer, which will continue cut and moved to the surface of the plastic bottle.

Templates

Option One - We make butterfly patterns on their own. For this, a dense sheet of paper of the necessary sizes (for example, Watman) bend in half. Near the bending draw half of the butterfly. Then, not flexing the sheet, cut out the template. Option Second - download the ready-made butterflies patterns from the global web and print on the printer. Next, cut out the prepared workpiece. In the first case, we get a purely individual craft, but it will have to spend much more time to spend on its manufacture. In the second case, the process of creating a butterfly will be significantly shorter, but it will not be able to boast of particular individuality.

Preparation of plastic bottle and template transfer on its surface

Cut out

In the next step, we already cut the butterfly from a plastic bottle. With their own hands and scissors, carefully pass each line caused by the marker at the previous stage. Do not rush and carefully cut out each workpiece. You also need to be attentive during this operation. One irregular movement with scissors - and the aircraft is spoiled. So that this does not happen, we make short-term breaks during the work. It will also be pre-venerable to determine the easiest and most convenient way to cut the blank.

Decorated

Next, you need to paint and arrange made by plastic bottle butterflies. Do it yourself it does not make much difficulty. We invent the drawing of the butterfly in advance. Then each color is gradually applied to its surface. To make different colors not mixed with each other, it is necessary to pause for 20-30 minutes after applying the next shade. Also during the work, you can use any remedies, such as beads or decorations. This will make the final craft more unusual. If there are no paints, they can be replaced with colored paper or cutting out of the glossy magazine. In this case, we draw each element of the decoration, cut it out and stick on the butterfly surface with glue. Again, do not forget to take pauses, in order for the glue to succeed properly to dry. At the end, there is already almost ready-made butterfly to open in stages and give it the opportunity to dry. This will make it much longer to maintain its original condition.

Fastening

It is not quite interesting if the butterfly will just lie on the table or some other place and dust. Therefore, it is recommended to come up with some unusual mount for a butterfly from a plastic bottle. It is not much difficult to make it with your own hands. The easiest way is to use thread or rope. The first solution is more preferable: so it will be the impression that the butterfly carries in the air. Another option is with the help of glue to fix the craft on some vertical surface (for example, doors or wall). Another creative option to accommodate such a butterfly in the room is the use of a magnet. On the one hand, it is attached to the butterfly with a glue coin (it must be mandatory to be magnetic). And then, for example, a magnet is applied to the curtain, and on the other hand, the butterfly. Another interesting option Fastenings are a wire. In this case, one end with the use of glue is fixed on the butterfly, and the second is on some solid, but moving surface (for example, doors). As a result, when the surface moves, the butterfly will be like a "soar" in the air. At the same time, after the door stops, the handicraft will still vibrate in space.

Let's summarize

This article presents a simple and affordable way to make a plastic bottle butterfly. The master class is simple enough, and it is even forces to those who have never been involved. So we turn on the fantasy and make bright and unusual crafts from plastic bottles.

These amazing butterflies can be made by plastic bottles. Plastic bottle butterflies can become wonderful Christmas toys for your Christmas tree, a decoration of a New Year's mask or a carnival costume, decoration of packaging for a gift, etc.

How to make a plastic bottle butterfly.

1. To begin with, draw the butterfly sketch. You can use the proposed templates or draw your own author's drawing on the sheet.

Templates can increase or decrease if necessary - the greater the bottle, the more butterfly can do.

2. To transfer the prepared sketch from a paper sheet on plastic, cut the top of the bottle to a smooth cylinder, insert inside the sheet with a pattern and fasten with a scotch or closet. Circle contours feltster.

3. Color the butterflies. First apply the contour lines, then fill the middle of each site and leave until the paint is completely drying. Now you can separate sections of the wings to miss the PVA glue layer and spray with sparkles or apply a special 3D gel with sparkles. Again let the decoration dry.

4. After all the paint dried, cut the butterflies along the contour.

5. Carefully bend the butterfly wings along the contour of the body. Now the butterfly of plastic bottles acquires the desired shape.

6. For the body, we will need beads different size And wire for beads. Slide the beads on the wire and secure the prepared torso on the basis of the butterfly in the holes in advance made by a seboard.

Here are ready fabulous butterflies from a plastic bottle. You can decorate with them not only New Year's holiday - such a butterfly can "sit down" on the tulle by the window or flower on the wallpaper with a vegetable pattern; A flock of butterflies slowly "fly" under the chandelier. If you glue a small magnet from below, the butterfly will be on the refrigerator. Further think up yourself.

Video How to make a butterfly from a plastic bottle.

Create beauty with your own hands, rejoice your own results and delight those who are next to you!

Are you going to throw out old plastic bottles? - Wait! This seemingly unnecessary and useless trash can become excellent material For the manufacture of the most different crafts with your own hands.

This time we offer you a photo master class by wonderful transformation This garbage in spectacular butterflies.

The curved surface of the bottles will give them the wings realistic appearance, and the use of acrylic paints different shades allow you to reproduce actually existing species These, beyond doubt, the most beautiful insects, and create their new, fantastic and even more beautiful species.

Butterflies from plastic bottles will decorate your garden, cottage, flowers on the windowsill, paintings handmade..., in general, everything that only wishes your fantasy.

You will also need:

Old plastic bottles (any bottle suitable, but keep in mind that larger bottle volume, theme bigger size can be made of her butterfly);
Stationery / Flat buttons;
Wood surface in which you could stick the buttons;
Acrylic paints;
Sandpaper (you can choose any emery paperused for primary grinding, but we have chosen on graining in 220mkm);
Polymer clay (for the most part of black and brown);
Glue strong fixation (we used hot glue glue, but its fixation was not enough. If it is possible, use epoxy glue);
Paint brushes;
Acute scissors or finishing knife (you can use a stationery knife).
You may also need:
Transparent varnish spray (preferably on an oil basis);
Powder based on mica (if you apply it on the wings of butterflies, they will be delightful to flicker and overflow);
Black wire;
Small black beads;
Maty acrylic gel.

Video: how to make a butterfly from plastic bottles with their own hands

Plastic Bottles Butterfly - Step-by-step instructions

Step 1. Preparation of bottles

To prepare bottles to transform into butterflies, the first thing you need to remove the labels from them. We did it, immersing the bottle into the shell with water and the low addition of dishwashes for a while. After that, even if the bottles remain not deployed pieces of paper, they can easily be removed by their hands. Do not worry if glue from the labels will remain on the bottle surface - it does not prevent the process.

Circular motion cut the upper part of the bottle and remove it, because in your work you need direct parts of plastic, and not curved. Do the same with the base of the bottle. You will have a plastic cylinder - cut it perpendicular in such a way that the cylinder will be rectangle.

Now you must polish plastic so that the paint is better to hold on it. In grinding only the outer side of the bottle needs. We used sandpaper with grain size 220mkm and polished plastic circular movements As long as he did not become matte and as if "covered in Ineu."

You can use any other emery paper for primary grinding and even paper for rough work (up to grain size 400mkm). The more roughly the grinding is made - the more paint will hold safely.

Step 2. Installation

Now you should think about what colors you will be painting your butterflies. Once you stop your choice on those types of butterflies that would like to portray, print a few of their photos. Then cut them out and circle along the contour on plastic with a permanent marker.

Make sure that the tips of the upper wings wing parallel upper edge Plastic, as shown in the photo. Otherwise, when folding with butterflies, you will observe a strange and unattractive overcast. To facilitate the transfer of the contour on the plastic, press the lower edge of anything heavy - in this case it will not shift during the redrawing.

Now you need to attach plastic to a wooden base. To do this, straighten it on the basis and fix using the stationery / flat buttons. Use for this free place On plastic, excluding the contours of butterflies. Try to fix the plastic so that it lay as close as possible to the surface of the base, but at the same time did not remember the caps of a strongly recessed buttons ( good training For your fingers!).

Step 3. Application of the base layer of paint

Now you need to apply on butterflies basic layer paints. If you have a matte acrylic gel, apply it first. Working with crumbling materials, always move towards the wing tips. Leave this layer for drying.

The base layer is applied to make the surface of the wings of the opaque and prepare it to the immediate color. We recommend white colorSince when using it, the coating visually looks more solid than when using another color. Cool also the lower surface of the wings. Do not forget to move from the center to the edges.

Give the base layer to dry. To accelerate the process, we used as a dryer normal hairdryer For hair, turning it on in cold air mode (in the absence of such a mode, you can use the lowest speed).
We apply the following layer: background coating.

Coloring your butterflies in the background color, referring to the previously printed photo. Use the lighter tone, as during the addition of parts it will be easier to apply the shade of darker.

Step 4. Add details

So that your butterflies really looked good, you must add some details. For example, you must recreate on their wings of the residence, or focusing on the photos for maximum similarity with the real prototype, or guided by a sense of one's own taste, if realistic does not have values \u200b\u200bfor you. Stopping should be drawn with a thin end of the brush and the color on the tone is darker or lighter background. Similarly, draw the rest of the details, or recreation of photos, or inventing your own.

At that time, while your masterpieces are dried, make the torso butterflies. Here you can also navigate in the photo. If realistic is important, use toothpick to add to the butterfly body parts, such as lines.

Make a mustache for each butterfly. To do this, cut a little black wire and stuck in the torso, spinning at the ends. Eyes can be made of black beads, pressing it into small clay pieces for modeling.

Now bake the body of butterflies in the oven. Most manufacturers recommend setting the temperature in the region of 110-135 ° C and bake the product for half an hour. But for reliability, you can hold the body in the oven longer.

Step 5. Latest Strokes

If you want the wings of your butterflies to sparkle and flicker, use powder based on mica. Lower a little wet brush into the powder, and then with careful strokes, add a little shine with a little shine.

When your butterflies are dried, cut them down in contours with sharp scissors. Next you need to apply spray. We used oil enamel varnish in the form of an emulsion to give them more glossBut you can optionally use a matte spray. Do not spray lacquer on the torso butterflies! Finish oil-based coatings react with polymer clay And make her surface sticky.

In any case, after applying a varnish and drying it, you have the last step. Collect wings and torso together. Use superclauses or glue on an epoxy basis, applying it to the outer surface of the wings along the attachment line of the body. Voila! Beautiful butterflies are ready.

Step 6. Using ready butterflies

There are many options for using butterflies from plastic bottles. You can:

Print them as decoration on packaged gift boxes or attaching in the same boxes as a gift keychain.
Use as decoration of the walls of your housing. Just apply on interior surface A small drop of glue and press the wall.
Plant your butterflies as flags on a map, attaching them to pointed nails.
Attach them to the pictures. The stunning 3D effect is accepted!

Or glue them to frames of paintings.
Use as items decor (in shop windows, on racks, etc.).
Decorate flowers and garden plants.
... use other ideas of applying in unlimited quantity!

From plastic bottles can be made with their own hands and other animals - for example, a simple, cute or even. And old plastic containers are excellent for making a variety of birds - a list of birds that can be made from empty bottles, on.