We decorate a denim jacket with our own hands. Mesh from an old tunic. Fancy dress scarves
You will need:
Golden and black lace braid 120 cm each; khaki rep ribbon 60 cm; golden braid 240 cm; 5 golden buttons; sewing threads; scissors; sewing needle; pins; 2 gold studs.
Step 1
Prepare shoulder straps. To do this, cut the rep tape into two parts, fold each part in half.
Along the perimeter of each folded in half rep tape pin and stitch gold and black lace.
Step 2
Cut 4 pieces of 40 cm from the golden braid. Weave two pieces into one braid (braid). Pin the finished woven braid (braid) and sew by hand to the shoulder strap. Shoulder strap pin over shoulder seam and fix.Step 3
Cut the remaining golden braid into 2 parts.
Fold each part in the form of a lace, pin and sew by hand along the bottom of the sleeves. Measure the length of each pocket. Sew the remaining lace along the top edges of the pockets. Open the buttons, sew golden ones in their place. Install rivets at the ends of the collar.
: Master Class
We draw motifs on the back of the jacket with spray paint
You will need:
Pearlescent spray paint for textiles in red, orange, light green, pink, violet and turquoise colors(Marabu); aerosol adhesive for temporary fixation of stencils (Marabu); pattern paper; cardboard as a substrate; tailor's pins with a ball at the end (Prym); stationery knife; scissors; simple pencil; tape measure.
Step 1
Cut out the pattern of the “symbol of peace” motif and draw butterflies of different sizes on paper.
Cut out the resulting stencils.
Burda. Sewing is easy and fast 2/2016
Pattern:
Not specified
Download the peace symbol motif for free, with which you can easily decorate the most ordinary…
Step 2
Insert cardboard into the jacket to prevent the paint from seeping through to another layer of fabric. Spray the stencils with spray adhesive and place them on the jacket or secure with tailor's pins as shown in the photo.
Step 3
Shake the can of paint well and spray it evenly over the stencils. For a beautiful transition of colors, spray the paint, slightly covering the previous color. Let the paint dry completely, remove the stencils and fix the paint with an iron.
Applique jacket decor
You will need:
Pieces of yellow and orange flowers; satin fabric Red; double-sided adhesive pad (adhesive base on both sides); sewing threads; tape measure; ruler; scissors; simple pencil; pattern paper; pins; applications.
Step 1
On the pattern paper, draw motifs for the emoticon applique: a circle with a diameter of 7 cm, two hearts and a smile.
Cut out a circle and a smile from felt, and cut out heart-shaped eyes from satin fabric.
Step 2
Sew heart-shaped eyes on a circle with a zigzag stitch. For a smile, first cut out a circle, and cut off a part of it in the form of a smile. Place a piece of felt under the smile and stitch it to the edge on the front side.
Step 3
Arrange the appliqués randomly on the jacket and secure them with an iron and a double-sided adhesive pad.
do it yourself
Source and photo: Burda. Sewing is easy and fast 2/2016
The material was prepared by Yulia Dekanova
It is very easy to look stylish and modern when you have a gold credit card that someone is constantly topping up and you dress only in branded and fashion stores. But if you have an average salary and a closet littered with long-outdated clothes (but still in excellent condition), then becoming a “cover girl” is very difficult. Is not it?
In fact, there is a secret that can even turn dad's t-shirt into a stylish top from the latest Alexander Wong collection. And for this you just need a little imagination, scissors, a needle and old things.
We offer 35 ideas on how to turn unfashionable, old, boring things into stylish novelties like girls from fashion blogs.
1. Denim skirt #1
We will need:
Long denim skirt with buttons or buttons. You can easily buy it in second-hand stores.
piece of cardboard
chalk or soap
scissors
First of all, we decide how long our skirt will be. Depending on this, wrong side carry out horizontal line.
Cut out a template with a rounded edge from cardboard. The width of the template depends on the width of the bottom of the skirt (we have 10 cm). On the wrong side of the product, applying a template to the line, draw semicircles along the entire length of the skirt. Cut the fabric with sharp scissors, following the intended pattern.
If desired, we can rub the rounded edges with a pumice stone to make a fringe, or leave it as it is.
Voila! Stylish miniskirt is ready.
2. Denim skirt #2
We will need:
The bottom that's left of denim skirt on buttons
scissors
sewing machine or needle and thread
It's over difficult option. We measure how long we want to make the skirt, and cut off the extra top. We measure our waist, hips and cut off excess fabric along the line side seam, and then neatly stitch or sew.
We outline the undercuts and sew them with a regular needle and thread. Then we make a small lapel at the waist and sew it up or sew it by hand. We fasten the skirt in front so that there is a large slit at the bottom.
The second minimalist skirt is also ready!
3. Stole skirt
We will need:
Large tippet (scarf) rectangular shape, preferably from light fabric, which does not crumble.
thin lace
cardboard
sewing pins
scissors
needles with thread
First of all, we measure the circumference of the waist. Now a little math, but not too complicated)))
Add to this number half of it. This extra length will give us the opportunity to gather the skirt to the waist, it is easy to take it off and tighten it back. Then, we divide the figure by 3.14. This will be the diameter of our circle, which we draw on paper. We draw on it two lines crosswise, which pass through the center, so that we get 4 sectors of the same size.
Here is the formula for perfect waist at 60 cm.
60 + 30 (waist plus half of that)
90: 3.14 = 28.5 (circle diameter)
Cut out a circle from cardboard. Then, fold the fabric in half twice. We apply to inner corner fabric one sector of the circle, circle it and cut it out. We bend the edge of the skirt (along the waist) by 2 centimeters and harden it with pins along the entire length. We cut holes along the bend line at a small distance from each other (5 cm). We pass a lace through all the holes. At the end, we tie knots so that the lace does not accidentally slip out.
And we have a brand new skirt ready!
4. Miniskirt from a stole or scarf
We will need:
Long tippet or scarf
Wrap the scarf around the hips once. Then, turn it over twice in front and continue wrapping it around you. We hide the end inside.
5. Black dress with a sexy neckline
We will need:
Old high neck dress
leather cord
scissors
needles, thread and pins
sewing machine
We draw a line in front, right in the center of our dress, to get V-neck. We draw a line from the neckline straight to the seam of the detachable waist. The neckline can be made both low and high, depending on your modesty. Our version is definitely not for work.
Cut with scissors along the line. We bend the fabric to make a cutout, and harden it with pins. We decide where we want to start our lacing, and from this point we divide the entire length of the neckline into five parts. We mark the points with chalk.
Cut the leather cord into 10 small pieces. We fold them in half, in the form of a loop, and attach them with pins along the cutout on both sides in the places that we marked with chalk. Sew the edges of the neckline to secure the fabric and attach the loops. This can be done manually or sewing machine.
After all the loops are securely sewn, we take a long cord and begin to twist it from the bottom up. We finish the lacing with a small elegant batik.
sexual Evening Dress ready!
6. Short T-shirt dress
We will need:
Big T-shirt
scissors
rubber
needle and thread
Lay the t-shirt on a flat surface, cut off the sleeves, and then cut in a straight line right under the neckline.
From the sleeves cut out two rectangles of the same size. This will be the top of the dress. We measure the volume of the chest and the length of the rectangles, if necessary, cut off the excess.
We connect the upper parts with the lower ones, and then we sew the dress on the sides.
We sew an elastic band under the bust, at the junction of the parts.
And summer Short dress ready!
7. Stylish dress with side slits
We will need:
Big T-shirt
scissors
needle and thread
First of all, we cut off the sleeves from the T-shirt, and then cut it horizontally just below the chest. We take into account that the bra does not look out.
Then, on the top of the dress in front, we make a small hole. On the lower part of the dress (near the waist) there is a small slit. We put the ends into the hole and sew or just tie.
Voila! Slit dress, very fashionable in this spring-summer season, ready!
8. T-shirt beach dress in 30 seconds
We will need:
Big long t-shirt
We put on a T-shirt through the throat. We put the left sleeve on the right side of the chest, and the right one on the left side. It turns out a cute beach dress with bare shoulders.
9. Beach dress from an old skirt
We will need:
Old skirt and t-shirt
scissors
needles and threads
strap
Lay the skirt on a flat surface and cut off the elastic at the waist.
We attach a T-shirt to the skirt and cut along the contour of the armhole and neckline.
We sew the straps with a needle and thread. You can use a sewing machine to be safe. Tie with a belt and the dress is ready!
10. Stylish cocktail dress with a cutout on the stomach
We will need:
old dress
cardboard
sewing machine
scissors
needle and thread
First of all, cut off the sleeves and shorten the length of the dress. We bend the armholes and the bottom by 1-2 centimeters, smooth it with an iron and sew it, or sew it by hand with hidden stitches.
We cut out a small triangle from cardboard and trace around the contour in the front central part of the dress. Cut through the bottom of the triangle, then make a perpendicular cut up. We bend the fabric and sew all sides of the triangle with small stitches.
Most of the work falls on the sleeves. You need to work hard on them. And then, chic and fashionable Cocktail Dress ready!
11. Dress with a fringe
We will need:
Short dress
scissors
floss threads different colors(an average of five flowers that match the color of the dress)
bright thin belt
We choose such a dress so that the fabric does not crumble. Preferably monochromatic. We make small holes along the entire length of the hem and sleeves, at a distance of 5-10 centimeters from each other.
Then, we cut the floss threads into small bunches, of the same length, so that they easily pass into the holes on the dress. We stretch the threads into the holes, alternating colors. We carefully tie each bundle with a thin thread so that it does not fall apart.
We tie up the dress bright belt and cheerful summer look ready!
12. Skirt and top
We will need:
Long maxi dress
rubber
scissors
needles and threads
pins
First, we turn the dress over so that the front becomes the back. Then we carefully grind out unnecessary decor elements using nail scissors (a pocket and a braid with buttons). We cut the dress into two parts along the seam line at the waist.
We mark how long we want to make the top and hem its edge manually or with a sewing machine.
We take an elastic band, preferably wide, and bend the top of the skirt, according to its width. Then we hem the belt so that we can populate the elastic inside.
Having attached the elastic to a pencil, knitting needle or stick, we stretch it through the loop until it comes out through the other side. After that, we sew the ends of the elastic band and carefully sew up the hole on the belt.
Voila, the flight suit is ready!
13. Balenciaga white top
We will need:
White elongated T-shirt with wide straps. Choose from thick fabric so that it does not crumble, and the edges do not curl
scissors
needles and threads
The first step is to cut the back of the T-shirt so that its length is a few centimeters below the clasp of our bra. Cut out, slightly retreating from the line of the side seams.
Then flip the shirt front side and mark the middle. Cut along a straight vertical line from the cutout to the very bottom.
We put on a top. long ends wrap around the waist and tie at the back. The upper edges of the neckline can be folded under the bra or hemmed.
The result is exactly the same top as from the latest Balenciaga collection.
14. Short white top
We will need:
Large T-shirt (several sizes larger)
scissors
needles, thread or sewing machine
chalk
Cut off the sleeves from an old t-shirt. Then we proceed to the cut. At this point, you need to determine how thick the straps we want and how deep the neckline. Depending on this, cut off the neck of the T-shirt.
Then, on the wrong side, draw a horizontal line at the level where our top will end, and cut it off. Top edges can be hemmed. To do this, you first need to make an overlap of 1 centimeter on all sides. If the fabric is soft and begins to curl a little, leave the top as it is.
Voila! Light and cute top is ready. Can be worn underneath bright swimsuit, bra or other T-shirt. Ideal for summer holidays or playing sports.
15. T-shirt with a heart
We will need:
Plain T-shirt a couple of sizes too big
old t-shirt or a piece of cloth to cut out a heart
scissors
sewing machine
pins
chalk
First, cut off the collar to make a wide-necked T-shirt that falls off one shoulder.
Then, turn the shirt inside out and draw a heart. Draw lines inside the heart, at a distance of 2-3 cm from each other. Cut them carefully.
From the wrong side we sew a piece of bright fabric on the heart. Then, manually, we sew each strip of the heart, using threads in the color of the fabric. Trim off the excess and stylish t-shirt ready!
16. T-shirt with bows on the back
We will need:
plain t-shirt in sizea piece of colored fabric or a bright old t-shirt
sewing machine
scissors
needle and thread
chalk
Lay the t-shirt upside down and mark the spot where we want to make the cutout. Carefully cut with scissors. The neckline can run from the throat to the very bottom. So it ends in the middle of the back, depending on personal preference.
We make from colored matter required amount bows (minimum 4). Their size directly depends on the width of the cutout on the back. When the bows are ready, manually sew them to the T-shirt, while not forgetting to bend the edges of the cutout 0.5-1 centimeter inward. Then carefully sew all the seams.
17. T-shirt with original mesh
We will need:
Wide T-shirt
chalk
scissors
rivets
We lay out the T-shirt on a flat surface, turn it inside out and draw 10 vertical lines on both sides of the neck at the same level (1-2 cm wide). We cut them and connect the strips in a checkerboard pattern with the help of rivets. Then, we make a vertical cut of 20-30 centimeters below on one side of the T-shirt. We tie the edges with a knot.
Voila, the t-shirt is ready!
We will need:
Big T-shirt
scissors
We lay out the T-shirt on a flat surface and cut off the sleeves to make large armholes; cut off the throat deep neckline, and shorten the bottom of the T-shirt. We do not throw away the lower border, we still need it.
At the back we make a cutout a little larger than at the front. Then we tie the fabric between the shoulder blades on the back with a thin ribbon and wind the border on top, which we cut off from the bottom of the T-shirt. We make an inconspicuous knot and cut off the excess. We shorten the bottom of the T-shirt in front and a beautiful summer T-shirt is ready!
19. Cutout denim shirt
We will need:
Denim shirt
scissors
ruler
pen
needle and thread
sewing pins
Turn the shirt inside out and use a pen to mark a horizontal line where we want to cut.
Cut the fabric along the seam lines.
We turn the shirt inside out and fold a few millimeters of fabric inward. We pin with pins and sew with invisible stitches. We iron it and the original shirt is ready!
20. Black cutout shirt
We will need:
Black shirt (or any other color with turn-down collar and placket with buttons)
scissors
chalk
sewing pins
needle and thread in the color of the shirt
glue
First of all, we put on a shirt and stand near the mirror to mark with chalk where we want to make holes. It is necessary to take into account their location so that our bra does not peek out. Once we've marked the hole on one side of the shirt, we need to copy the pattern onto paper so we can transfer it to the other side for a symmetrical look.
We cut the fabric, retreating 1 centimeter from the intended pattern. We make small cuts along the entire edge of the resulting cutout. To avoid wrinkles, it is best to sew on a mannequin or put a shirt on a pillow and stab it in the back with pins. Sew with blind stitches along the entire length or glue with glue if you don’t want to sew. At the end, iron the edges with an iron and the shirt is ready!
21. Backless shirt
We will need:
voluminous shirt
scissors
needle and thread
We turn the shirt inside out and mark the line where the neckline will be. Carefully cut with scissors along the line from one shoulder to the other.
We bend the edges by 1 centimeter and sew or sew with threads by hand. We retreat on both sides by 5 centimeters and make a few stitches to fasten the upper and lower part the back of the shirt.
Voila! Stylish thing ready!
We will need:
Plain button-down shirt with turn-down collar
beads of at least two colors
scissors
needle and thread
We lay out the shirt on a flat surface and sew the beads to the collar in a chaotic manner.
23. Sweater with an open back
We will need:
Sweater or sweatshirt (we select from a material that will not stick around and crumble)
Velcro or button
scissors
needle and thread
Fold the sweater in half vertically and mark the middle. Then, cut it on the back in a straight line. We sew Velcro or a button on top so that the sweater does not unbutton itself. If desired, you can tuck the edges, iron them and sew with blind stitches.
24. Original sweater
We will need:
Sweatshirt
colored tape
sharp scissors
needles and thread
First of all, we cut off the throat from the sweatshirt to get a fairly deep neckline that falls from one shoulder.
Then, using scissors or a cutter, we make about 15 rows of small holes at a distance of 1-1.5 centimeters from each other. The holes must be at the same level. Their number gradually decreases, reaching the lower rows.
We populate the tape in the holes. The ends must be sewn with a few secret stitches to the sweatshirt or simply tied in a knot.
That's all!
25. Sweater with patches on the elbows
We will need:
Sweater
shiny fabric or sequins
scissors
needle and thread
paper and pen
Use your hand as a template. We circle it on paper, forming an oval and cut it out.
Apply the template to shiny fabric and fix. Cut out patches. We make sure they are the same shape.
Attach the patches to the sweater with pins to make sure they are in the right place. With inner stitches, carefully sew the patches to the sweater.
Patches can be of any shape and from any material.
26. Stylish T-shirt scarf
We will need:
Old T-shirt (than larger size, all the better)
scissors
ruler
chalk
Cut off the bottom of the T-shirt. Then draw on the wrong side horizontal stripes, 2-4 cm wide.
We get many rings, which we stretch one by one until they begin to twist inward.
Cut the hem of the T-shirt to make a long ribbon. Gather all the rings together and wrap the ribbon around the hem several times to secure the scarf. We tie it into a knot, cut off the excess, and tuck the ends under the ribbon.
Unusual scarf is ready! Looks great with long hair or careless bun.
27. Bright jeans #1
We will need:
Pair of jeans
fine brush
paint or corrector
paper
First of all, we decide what kind of pattern we will apply to the jeans. We outline the places where the pattern will be located. Then we cut a stencil out of paper. We apply it to jeans and very carefully paint over with paint or corrector so that it does not spread beyond the borders of the stencil.
28. Bright jeans #2
We will need:
Pair of jeans
cutter
wooden plank
sandpaper
marker
We lay out the jeans on a hard surface and outline the places where we want to make scuffs. Then using sandpaper, lightly overwrite these places.
We put a wooden board inside the leg so as not to cut through the jeans and arm ourselves with a chisel. Doing horizontal cuts different lengths at a distance of a few millimeters from each other. At the end, paint over the threads with a regular marker, bright color.
29. Fashionable skirt, shortened in front
We will need:
Long no pleated skirt
scissors
needle and thread
iron
Fold the skirt in half so that the fold passes through the center of the front. We put it on the floor and cut out a piece so that the mini-part smoothly goes to the bottom.
Each time we put on a skirt and see what happens. If necessary, we level, because it is always better to undercut than to cut off too much. After we were satisfied with the long and curved line, we fold all the edges by 1 centimeter and smooth it with an iron.
Then we sew the edges of the hem with small stitches, using threads to match the fabric. At the end, we again go through all the seams with an iron.
Stylish skirt ready!
30. Denim jumpsuit
We will need:
Denim overalls
scissors
We measure the overalls and note how long we want to make it. We cut off the legs not in a straight line, but with a slight rise to the top. Then carefully cut off the pocket on the chest.
To make the jumpsuit look modern, remove the buckles. We shorten the harnesses and make a hole for the button at the end. If desired, the edges of the shorts can be hemmed.
31. Gladiator sandals
We will need:
Sandals in the finger
long leather cord or thin tapes(4 meters)
scissors
glue
Sandals will look much more natural if you thread the lace through an existing hole.
We cut the cord into two even parts of two meters. We stretch it through the hole and glue it from below if we do not want it to slide into different sides.
Then just weave around the leg tightly enough so that the lace does not fall down, and symmetrically so that the sandals look beautiful. Weave as high as we like and finish with a small bow at the back.
32. Shoes-cats
We have to:
Ballet flats (preferably solid color with a round toe and enough front seats)
black paint (acrylic), black marker
brushes
masking tape
white paint and white marker
First, we tape the shoes with tape, hard enough so that the paint does not seep through.
We paint the socks with black paint to make it even color, without light gaps. When the paint is dry, remove the tape and draw small triangles for the ears. You can also use painter's tape for this if it's not very smooth by hand.
To draw the eyes, use white paint, highlighter or corrector. Draw with it thin mustache and nose.
And voila! Last fashion trend appeared in our wardrobe!
33. New flip flops
We will need:
A couple of the most ordinary flip flops
ribbon, in the color of shoes
beads and beads suitable color
needles with thread
We wrap the flip flops with tape, and sew the tip from the bottom so that the tape does not unwind.
We sew beads and beads in a chaotic manner with a thread of the same color as the ribbon.
In half an hour, stylish flip flops are ready!
34. Freshen up black shoes
We will need:
A pair of black shoes, rounded or pointed
masking tape
brush
white and neon yellow acrylic paint
Cover the shoes with masking tape. We carefully smooth it so that the paint does not leak under the bottom.
First, we make one layer of white paint and let it dry for several hours. Then paint yellow. We remove too pronounced strokes and let the shoes dry a little.
Wet your fingers with water and run them over the paint to smooth out bumps and lines. We remove the masking tape when the paint is not yet completely dry, and then leave the shoes on all night.
Voila! And you get trendy shoes from your old, boring pair.
35. Sports bag
We will need:
T-shirt with bright print
sewing machine
scissors
Cut off the bottom edge of the T-shirt and remove a little on the sides. We sew all sides on a sewing machine.
It turns out beautiful sports bag or a bag for shopping.
36. New hat from an old sweater
We will need:
unwanted sweater
ready-made hat (for a template)
· scissors
thread, needle
Choose a sweater with elastic at the bottom edge. We cut the blank from the bottom of the sweater so that the elastic falls on the forehead, and one of the edges of the cap falls on the seam of the sweater.
Using finished hat as a template, cut upper part blanks. Sew the top and side edges from the inside with a triangle.
Don't throw away your sweater! You can make a lot more out of them.
37. Sweater boots
We will need:
· sweater
· slippers
· sewing machine
threads
glue gun
· decorations
Take measurements on the leg and cut out blanks from the sweater. Sew the side and top edges boots on the machine.
Passing the slippers into the bottom of the blanks, glue them with a glue gun.
Finished boots can be decorated to your taste. For example, buttons or embroidery.
38. Ballet tutu (without sewing)
We will need:unwanted tapes
wide elastic band
Make a rubber band. We pass the ribbons, tying them on the belt with a knot.
To make the pack more magnificent, we make several layers of ribbons, repeating the rows.
We will need:
Long T-shirt or T-shirt
· scissors
Cut the bottom of the T-shirt into equal strips. We tie the strips, following the sequence in the photo.
40. Bag from old jeans
I really love denim clothes. Breaking through a couple of bags of old jeans, you find a whole source of inspiration for creating new things. Strong material (which, by the way, does not go out of fashion) makes pretty wallets and bags. Here is one of the options for creating a unique jeans bag.
We will need:
· jeans
Thread with a needle
trouser belt
a piece of colored cloth
Cut off the top of the jeans with pockets.
Sew fabric from an unnecessary colored dress or skirt to the bottom edges. Stitch the bottom of the bag. We make handles from the belt.
41. T-shirt fringed beach bag (without sewing)
We will need:
· t-shirt
· scissors
· ruler
crayon or marker
After straightening the T-shirt, cut off the collar and sleeves.
We make cuts on the bottom of the T-shirt. You can use a ruler and crayon to draw the same stripes.
We tie the fringe as tightly as possible so that nothing spills out of the bottom of the bag.
42. Tie maxi skirt
You can make from old ties long skirt hippie style.
We will need:
ties
threads
· sewing machine
a belt from an unnecessary skirt
We sew the ties with one end to the belt and sew the sides of adjacent ties together.
43. Tie miniskirt
We make a miniskirt in the same way as a maxi. You just need to cut the ties to the required length.
Voila! Sexy bright skirt is ready.
44. Fancy decoupage shoes
Using the decoupage technique, you can hide scuffs and cracks on your favorite shoes.We will need:
· shoes
· PVA glue
· scissors
drawing paper
We cut out the necessary figures from paper.
We apply PVA on the surface of the shoes (you must first clean and dry the shoes).
Since PVA dries very quickly, do not glue all the shoes at once. Apply it in fragments. When you finish laying out the drawings in one area, move on to the next.
When the pictures are dry, you can show off at parties in unusual shoes.
45. Light summer sundress made of scarves
We will need:
two large scarves or pareos
· ribbon
threads
· sewing machine
We form a blank from scarves, folding them in the right way. For example, by forming a bodice from the corners of scarves.
We sew ribbons to the corners, the ends of which we fix on the back. We sew the sides of the scarves.
46. Sock gloves
We will need:
couple of socks· scissors
Thread with a needle
· decorations
Cut off the toe and heel of the socks.
To prevent the fabric from unraveling, we sew the places of cuts with threads. We tuck the edges - the gloves are ready.
You can decorate them bright applications, embroidery or beads.
47. Stylish summer dress from a baggy sundress
We will need:
old sundress
・fitted dress
· scissors
threads
· sewing machine
· chalk
Choose from the wardrobe a dress that fits you perfectly. Using it as a template, attach the dress to the front of the sundress and trace with chalk. We repeat the steps with the back.
Cut out the edges and sew the edges.
From the leftover fabric, you can form a belt, bow or fake pockets that will decorate your new dress.
48. Maxi dress (without sewing)
We will need:· long skirt
original belt
We put on a skirt at chest level and tie it with a catchy belt. Ready!
Plus of the dress: it quickly turns into a skirt.
49. Plaid poncho coat
We will need:
· plaid
· plate
· blade
chalk
Thread with a needle
· belt
Lay the blanket out on a flat surface and fold it in half.
Attach a plate to the neck and mark a semicircle with chalk. Cut out excess fabric. Overcast the collar with a thread so that the fabric does not diverge.
At waist level (only at the front of the blanket), mark two cuts with chalk and cut them with a blade. Cover the cuts with thread.
Insert the belt into the holes. The coat is ready!
50. Burberry scarf coat in haste
Burberry is fashion fabrics with original check pattern. It won't be hard to get a scarf like this.We will need:
scarf "Burberry"
· chalk
Thread with a needle
· blade
buttons
Throw the scarf over your shoulders and mark with chalk the places where you want to sew on the buttons. Sew on the buttons and carefully use a blade to make holes for them on the opposite side. To prevent the fabric on the cuts from dispersing, overcast the edges with a thread.
Plus this coat in that it is a transformer thing. With a flick of the wrist, the coat turns into a scarf again!
We will need:
· sweater
Thread with a needle
· chalk
· decorations
Turn the sweater inside out. Straighten the sweater, put your hand on the side and circle it with chalk. Repeat with the other hand on the opposite side of the sweater.
The blanks should be slightly larger required size. Cut out the blanks and sew the edges.
After trying on, cut off the excess edges and turn the mittens inside out so that the seam is inside. Ready-made mittens can be decorated to your taste.
52. Fancy dress scarves
We will need:
· dress
· scissors
jewelry
Cut off the hem of the dress. Cut strips on the bottom of the fabric.
Tie the ends of the strips at the bases into knots. However, this is not necessary, because the scarf already looks original.
The new thing can be decorated with a brooch or other jewelry.
53. Sundress and T-shirt dress
We will need:
sundressT-shirt
Thread with a needle
· wide belt
Cut off the top of the sundress and sew the hem to the T-shirt.
Wide belt not only complement the outfit, but also emphasize your waist.
The top can be decorated with a bow from the remnants of a sundress.
54. Sexy underwear from a simple bra
Prices for beautiful underwear can cause depression. And so you want to always be on top. Well, do not rush to despair, you can make an erotic bodice with a minimum of effort.
We will need:
bra
Packing of rivets for fabric
Pliers or manicure set 
Pierce the bra fabric with the sharp edges of the rivet so that the point comes out with opposite side.
Gently bend the ends of the rivet with pliers.
Form the desired pattern.
55. Mesh from an old tunic
We will need:
tunic (cotton)· scissors
hot water bowl
Cut out circles of fabric from the tunic.
Soak in hot water(from which the edges of the cuts will wrap up and the material will not spread). Keep in mind that this can only be done with clothes that sit on you freely. Cotton shrinks in hot water.
Dry - done! So easily and quickly a simple tunic turns into a seductive designer outfit.
Don't be afraid to experiment and be bright!
The content of the articleEach successful woman must have a jacket in her wardrobe. It can be used in various areas: from the office to evening out. Women's jacket it can be very easily changed by simply adding strict or elegant notes to it. The jacket can be classic black, white, gray or printed, tapered or straight, cropped or elongated, knitted or denim.
Thanks to its creative fantasy many women of fashion can this strict everyday or even old model transform by adding on the sleeves or on other parts of this clothing interesting decorations. On the Internet you can find a lot of master classes that will tell you how you can transform your jacket yourself. Fashionable advises beginners to start with small changes.
Brooch
Experiment with brooches first. This accessory is considered an unpretentious and versatile decoration that will suit even knitted jackets. There are a great many brooches. They may be the most different forms and sizes. Brooches are metal, wooden and fabric, which can be with or without stones.
Now at the peak of its popularity, large textile brooches in the form of flowers. They look very modern and attractive on white or black. plain jacket. Very interesting options with rhinestones that depict flowers, animals or plants.
Strict office clothes pearl brooches can add elegance. They are recommended to be attached to the breast pocket or to the collar.
You can easily make a brooch with your own hands. For this you will need: universal base, foamiran, button and lace. From foamiran it is necessary to cut out the petals, with the help of an iron to give them necessary form and glue them together with a heat gun.
original print
Creating decor with your own hands is an exciting and impressive process. In addition to the brooch, you can decorate your jacket with an interesting print. To do this, you will need: black liquid paint for textiles, a white jacket, rubber gloves and clothes pins.
The jacket will need to be folded in the middle lengthwise. The middle must be marked with pins, after which black paint should be sprayed onto one half. Then, according to the pin marking, carefully cover this half with the other and tightly attach them to each other. These halves should be carefully straightened so that there are no dents. After ten minutes, the back of the jacket should be straightened out and the jacket allowed to dry. The original print is ready.
Pockets and buttons
You can also decorate and update the jacket with buttons. To do this, replace your small, inexpressive buttons with large analogs. original form. In this case, any jacket, knitted or denim, black or gray will look completely new.
You can also decorate the jacket with the help of pockets. They can be both classic and original. It will be very easy to sew such pockets with your own hands. They should match or contrast in color with the jacket.
Scarf
Not every woman knows how to combine completely different things in order to create an integral image. A scarf, shawl or scarf can also be used for this purpose. The handkerchief can be tied around the neck, very close to the collar, and also tied at the wrist instead of a bracelet under the sleeve.
A scarf and stole can be thrown over a denim, textile or knitted jacket like a shawl. A red and white scarf is perfect for a denim jacket. Thus, you will create a marine romantic image which will remind you of summer holiday on the sea coast.
Patches
This season it is fashionable to decorate jackets in military style. At the same time, not every girl will be able to decide on epaulettes. However, any girl can decorate the collar with pearls, beads or rhinestones.
You can sew beads, threads or sequins not only on the collar, but also on sleeves, pockets and even on the jacket itself. You can also use a decorative cord in this capacity, from which you can create the most bizarre shapes. At the same time, embroidery can be either the same color as the jacket or have bright shade. And pockets can be decorated with original flaps.
Application
Applications on the jacket can be made of leather, lace or other fabrics. Pieces are placed on any part of the jacket, the appliqué will look especially good on the collar, sleeves, and also on the bottom of the jacket. First put the pieces on Right place and sew them with small stitches.
