All fur products require proper care and special attention. Often, the winners of the fur coats arises a question of how to whiten the fur. Due to constant use or long storageSuch products lose their initial aesthetic appearance and beauty, yellow.

Conduct bleaching procedures can be at home without resorting to the services of professional dry-cleaners, so the question of how to whiten the fur at home is relevant.

All fur products require proper care and special attention.

The cleaning of white fur products can be carried out at home when using various and most unusual products.

A great whitening effect has small chippers of trees with the addition of purified gasoline

The main options to help cope with pollution on things and whiten white furare the following:

1. An excellent whitening effect is the minor colors of trees with the addition of purified gasoline. In this case, special sawdust can be purchased at any store for pets (when buying, pay attention to the fact that the product should not contain a resin), and gasoline can be found on the supermarket shelves in the department household chemicals. To clean the product, it is enough to mix these two components and scatter on the surface of the fur, carefully rub. At the end of the procedure, fur is combed and shaking the remains of sawdust.
2. You can use alcoholic solution with adding food Soda. For the preparation of a cleansing agent, the components should be mixed in a three-one and soft sponge ratio to handle the fur surface.
3. If at home there is pets, you can lend them a little shampoo and carry out the bleaching of the fur product. From such a shampoo there is a weak soap solution, applied on white fur and wipes dry napkin or paper towel.
4. As a bleaching agent, a conventional cereal can be used. It needs to handle fur products, laying out things on a solid and smooth surface. Such dry cleaning will easily cope with dust and yellowing. Upon completion of the procedure, it is necessary to unleash the remains of the cereals from the topics.

In order to whiten the yellowed natural furYou can use one of the ways described above or try such a method as dry-cleaning services.

As a bleaching agent, a conventional cereal can be used -

How can I get white with artificial fur products?

To whiten the artificial white fur, you can use the previous cleaning methods or use other approaches. For example, prepare a bleaching mixture, which consists of all of the two ingredients: water and glycerin. For such a solution, it is necessary to mix the components in equal amounts and put on fur product. All actions are carried out in the direction of the pile, after which the fur is dry and neatly combed with a brush with a soft bristle.

Relief from yellowness will help semolina cereals with potato starch

Cleaning artificial fur can also be carried out in the following ways:

1. Freight from the yellowness will help the semolina cereal with potato starch. For the procedure, it is necessary to smoothly decompose the product on the solid surface and straighten all the folds. Next, sprinkle the fur with a mixture of Manka and Starch. Via paper napkin Processing the surface, gently and easily rubbing cleaning components into a pile. Upon completion of cleaning, it is enough just to shake the fur product to remove balances of bleaching.
2. You can also prepare an alcohol solution with the addition of conventional food soda. The glass of water will require 15 milliliters of medical alcohol and a teaspoon of soda. Mix all the components thoroughly and with the help of the pulverizer to distribute over the entire surface of the fur. Next, using a soft brush, clean the product in the direction of the pile.
3. Well proven itself whitening spray, prepared on the basis of water and six percent hydrogen peroxide. In order to get a whitening solution, it is necessary to take a glass of water and about ten milliliters peroxide. After that, to pour into a container with a pulverizer and spray over the entire surface of the fur product.
4. Another way can be the preparation of bleaching mixture. For this, you will need the following components: dishwashing agents, potato starch and washing powder. It is necessary to mix the ingredients in equal proportions and apply to the pile. Wait until the mixture will dry out completely, and brush with a soft bristle.

On a note! In extreme cases, in order to whiten faux fur And get rid of various contaminants, you can use this way as the usual hand wash.

You can also prepare alcohol solution with the addition of conventional food soda

How can I wash the artificial fur without damaging the product?

How to whiten an artificial fur if the dry cleaning did not bring due results? Almost all products made from synthetic materialscan be subjected wet processing. The main thing is to do everything correctly and most carefully.

Virtually all products made of synthetic materials can be wet processing

In order to get rid of various pollution, stains and whiten the artificial fur, you will need such cleaning instruments and means as:

• small but spacious basin or bowl;
• shower gel or shampoo (it is not recommended to use liquid washing powder, since aggressively affects the product from fur);
• soft sponge or non-rigid brush;
• paper napkins or towels;
• light terry Towel..

Process wet washing It will consist of several stages. First of all, it is necessary to place a fur product in such a way as to provide access to all places and smooth out the folds. For convenience, you can hang the thing on the shoulders. In a small basin with barely warm water you need to dilute not a large number of Gel or shampoo. Shake the mixture so that it happened a lot soapy foam. With the help of a soft sponge or brush to handle the entire surface of the product, trying to work exclusively with foam using minimal amount water.

Upon completion of the procedure, dry napkins or paper towels, you need to remove the excess moisture from the surface of the fur. You can also use a terry towel that can absorb maximum amount moisture. Next, neatly your hands to smooth the pile in the right direction and leave to dry in the warm room, avoiding proximity to heating devices and batteries. An important point It is that combing an artificial pile can only be combined when it is completely dry. For this, the usual comb with stupid cloths or a special brush is suitable.

On a note! Correctly performing all actions, you can whiten and refresh the fur, as well as get rid of such pollution as various spots and dust.

How can I clean the products made of fox and black fur products?

Products made of fox fur have always been signs of luxury and beauty. Soft to the touch thing brings warmth and comfort. Unfortunately, even the most careful care It will not be able to protect the owner of the fox fur coat from the yellowing of fur.

Mixture ammona alcohol with hydrogen peroxide will help get rid of temporary yellowing and return the whiteness of fox fur

How can I whiten fox fur? There are several proven methods listed below:

1. Potato starch has the ability to bleach various fabrics and fur products. He, as a sorbent, absorbs pollution and allows you to return initial whiteness things. In order to clean the product from the fox fur, it is necessary to process all its surface with potato starch, after which it is gently launched this component into a pile. Upon completion of the procedure, it should shook the remains of starch from fur and carefully combing the coat with a soft brush.
2. A mixture of ammonic alcohol with hydrogen peroxide will help get rid of temporary yellowing and return the whiteness of the fox fur. Cleaning agent can be prepared by mixing a glass warm water With a teaspoon of peroxide and a few drops of alcohol. Spray the bleaching solution onto the pile of the product and hang the product in such a way that the sun rays fall on it.

To return the brilliance and radiance of the fur coat, it is possible to be treated with a napkin moistened in a weak acetic solution.

Quite a large number of women are happy owners fur Shub, coats and other fur products. Whether it is a white natural or white artificial fur, it will still turn yellow. Therefore, it is necessary to know how to clean the white fur from yellowness at home. In this article you will learn how to do this, as well as we will tell you about the reasons for the yellowing of fur products.

The most popular way

One of the simplest and effective methodsHow to clean white fur with pipes - use hydrogen peroxide. Its price is small, and you can get a solution in each pharmacy:

1. Mix hydrogen peroxide together with water in proportion 1: 1.
2. Then spray the resulting solution from the pulverizer to the pile.
3. After this procedure, leave your fur coat until complete drying in room temperature.
4. When it is completely dry and completely dry, carefully draw it out with a rare comb, and then shake slightly.

Important! In the event that only a certain part of the clothing is covered with fur, be especially attentive. Spray hydrogen peroxide solution so that it can not get on other parts of clothing. Otherwise, the effect of cleaning will be very uneven, and the rest of the things you can permanently spoil. You can cover parts without edge by plastic film so that they do not have divorces from hydrogen peroxide solution.

Products for animals will help in the fight for whiteness

Sufficiently unexpected, but the justified way of cleaning white fur is the use of domestic washing shampoo. If you think about a little, then a similar solution will be very logical, because we get fur with animals and for washing their own pile is intended similar cosmetics.

Method of applying for animals shampoo to restore white fur:

1. The remedy is in warm water.
2. Moisten the solution with a solution or a cotton disk.
3. Persoet it carefully and process the edge in the direction of gross growth.
4. After that, the fur coat wipe the napkin and let dry.
5. Cut the face with a soft brush, and after - take a lightly to give it a beautiful shape.

Clear white fur can be cleared with another zoological product:

1. Fill a small amount of gasoline minor sawdust, which are used to maintain pets.
2. Give them soak.
3. Sprinkle white fur sawdust and leave for a while.
4. After that, only clean the fur coat and thoroughly spread out.

Important! This method will help not only clean the white fur at home, but also remove from the surface of the fur product. small pollution.

How to whiten natural snow-white fur?

Before proceeding with the independent return of snow-storey to natural fur, thoroughly clean it from dust, as well as dirt, because even the most ordinary pollution contributes to the appearance of yellowness. Put your thing on a wet surface and walk through the pile of light-tender movements. Dry.

Now you can proceed to the return of snow-storey. To do this, it is easiest to apply folk methods, because the means to clean the white fur from yellowness at home, more than enough. And they are all available and for sure you have in the first-aid kit or in the kitchen.

Folk remedies for fur cleaning

• Excellent helps clean the fur from yellowness potato starch or semolina cereals. Put the product on a flat surface, cover the starch or semolina, and then carefully disperse, as if washing. After that, we spend your fur froth and take the remaining starch tag / semolina with a stick.
• Ordinary blueboard will also help solve the problem, how to recover an attractive and neat white fur to the desired state. Instruct it in warm water, according to the instructions from the manufacturer tools, moisten the sponge in the solution or the same cotton disk and process the fur.
• You can also divorce soda and medical alcohol In proportion 3: 1 in a slightly warm water. In the resulting solution, moisten the brush or a sponge and carefully, but carefully, spend on the fur in the direction of the growth of the pile. This method is well cleaning the fur products from dirt and dust from the street.
• To get rid of more persistent contaminants, you can mix potato starch and purified gasoline. Apply a paste to the stains against the direction of a pile growth, let's dry. Then remove the powder with the brush and extend your fur product.
• Check bran, which will also help you safely clean the white fur from yellowness at home. In the pan, warm them up to the hot state, do not forget to stir them. Then hot bran stick in fur. And then, when they are cooled, thoroughly shake your fur product.

Important! In no case, do not moisten a member (the basis of the accessory outerwear). Fur B. this case It is best to dry on the sunlight, since the rays will enhance the effect of bleaching substances, as well as speed up the process.

Fur Fur Maine!

Fur for outerwear makes from a pile and scooters of different animals, so and when cleaning it is worth picking more suitable tool For a specific product. Here recommendations will be as follows:

1. The peroxide is used to brush from yellowness at home. White mink fur.
2. If it is necessary to whiten the fox fur, simply increase the concentration of hydrogen peroxide in solution.
3. Everything the above methods It is also suitable for fur products from Chernoburki.
4. In order to whiten the white rabbit fur, you can use both previous ways and prepare a slightly different solution: Mix the water in the amount of 1 tbsp. and salt - 1 tbsp. l. Next, act as with peroxide.

How to properly care for a snow-white fur?

In order for the white fur to be constantly cleaned, it must be stored in proper place and form. Here are several useful recommendationsSuppose to maintain the original beauty of the white fur product:

• During the cleaning of fur, it is not three of it too intense, otherwise it can break.
• Keep the fur product in a linen bag or paper of blue colorso that he could not turn yellow.
• If the fur sweatballs, you can wipe it with a cloth, which is pre-moisten in 9% vinegar, and then post it for air.
• Protect your fur products from moths will help geranium leaves, orange peel or tobacco, if they are spread in close proximity to the product in the closet in the fabric bags.

What to whiten an artificial fur?

At that moment, when things are made of artificial fur on a synthetic basis, they can be erased by hand, and after careful drying, spread out. But if the base consists of cotton, it is not recommended to wash, because the product may be deformed. Or before starting washing, reflect the lining.

To bleach products from artificial fur with the above-described methods using hydrogen peroxide, starch or a solution of glycerol. For the latter: Take the same parts of the water and glycerin, mix them thoroughly and clean the resulting mine.

Important! Not all species artificial fur You can bleach using gasoline. For artificial doodle this method Not suitable.

Over time, every natural fur is typical of color change. Under the action of bright light, the pigment is burning apart contained in the hairs. This is especially noticeable on the products with white fur. The yellowness that appeared deprives the charm of white fur products and makes you think about the ways of returning whiteness to your beloved thing.

Fully get rid of the yellowness - the task is difficult, and not always fulfilling, but there are folk methods, with which you can significantly adjust the color. There are also specialized dry cleaning, which are taken for such work, but they are rare and require considerable money for this service. At the same time it is necessary to remember that from chemical cleaning Fur is very wears, and the product itself can "sit down".

How to whiten natural white fur

Before proceeding to independent bleaching natural fur, it should be clean carefully from dust and dirt, because ordinary pollution Also contribute to the appearance of yellowness. Put the fur product on the wet sheet and walk on it with light-tender movements. Let dry.

Now you can begin whitening. The first method is more like a dry washing, in the process of which the fur is cleared with a sorbent, and thus the product acquires more light tint. For this procedure, the chalk, erased into powder, or starch, and the semolina can be used, you can use flour, but it is more difficult to comb. The material must be scattered throughout the fur surface and labeled into the villi. He will absorb the existing dirt, and after some time will remain just as it should be combined with a brush or clean the fur from the sorbent with the help of a vacuum cleaner. Having a C. long fur It is necessary to work on the pile, and short - against the pile. To achieve a larger effect, it is recommended to repeat the procedure.

There is another recipe whitening mixture with starch. It is necessary to mix it with purified gasoline. The mixture should be thick. Rod apply a mixture on the villi, wrap, let the fur dry and squeeze the brush. After processing with gasoline, the thing ventilate fresh air. Instead of starch, you can take sawdust, just choose from hardwood trees so that there is no resin. Small sawdust need to be soaked in pure gasoline, then launched into the fur product, then shake out.

The recipes of bleaching fur gasoline are better suitable in case you need to remove fat pollutionIn places where the fur product has contact with the skin when the surface of the fur could have a tonal or other cream.

For another way, you need to buy bran. Heat them in a frying pan before the hot state, not forgetting to stir. Then hot bran should be labeled in fur. And when they are cooled, shake thoroughly.

For the next option, it will take a hydrogen peroxide, a teaspoon of which mix in a glass of water with several drops of ammonia alcohol. Choose an invisible piece of fur and check the solution action. In the absence of negative changes, you can begin whitening. Wet a sponge or cloth in this solution, squeeze well and spend on villi to full fur moisturizing. It is important not to wet the Mebra. Dry fur in this case is better at sunlight, since the rays will enhance the effect of bleaching substances and speed up the process.

To whiten the rabbit fur, you can use both previous options and prepare another solution. To do this, in the above-described recipe, it is necessary to replace hydrogen peroxide with a tablespoon of salt.

Another method of combating yellowness is to cut the fur with blue. To do this, divert blue hot water Before getting a pale-bluish tint. Sponge Lubricate the tips of the fur with the resulting liquid and give the product to dry.

When things made of artificial fur are made on a synthetic basis, they can be sized manually, and after drying combing. But if the base is of cotton, then you should not wash, as the product can be deformed. Or before washing it is necessary to fracture the lining.

Whitening artificial fur can be bleaching in the methods described above using hydrogen peroxide, starch or glycerol solution. It is necessary to take the same parts of water and glycerol, mix and clean the fur with this solution.

Not all types of artificial fur can be bleached with gasoline. For artificial doodle, this method is not suitable.

Yellow spots are also derived from lemon juice divorced in the same amount of water.

If you failed to get rid of the yellowness, there was no method, then the thing will have to repaint.

LiveInternetLiveInternet

— Search by diary

— Statistics

- domestic shampoo;

In order to whiten the yellowed fur, take 1 teaspoon of 3% hydrogen peroxide on 200 ml of water. Add a few drops of ammonia alcohol. Apply the solution to an invisible part of the product to check the reaction. If the fur did not change the color, clean poropolon sponge Park. Dry the product in the sun.

Grind the chalk into the powder and carefully wrap in fur. After cleaning, shake the product. Chalk effectively removes pollution and whiten.

To get rid of the yellow furs from the yellowness, take potato starch. Apply to the pile. Pour the soap solution into the sprayer and spray on the product. Then hands gently scroll the mixture and wait for complete drying. Brush thoroughly shake powder. After the first procedure, the result may not manifest.

To combat yellow furs take advantage babushkina recipewhich is based on optical deception. In warm water, divert a little blue and moisten a sponge in it. Slightly spend on the pile and wait for complete drying.

To fur not yellow, you need to delete pollution in time. Fat stains can be output with gasoline or stain remover. Apply a cotton swab in the pile. After a sponge, rinse with warm soap solution. Clean fur blot with paper towel. Then dried and shake.

Cleaning a light fur product at home is a difficult matter, so if you do not want to give fur sand into a dry cleaning, try the method you choose on an invisible area.

starch, semolina, ammonia, salt, water, hydrogen peroxide, talc, brush, gasoline

White, very polluted fur it is desirable to clean the starch and gasoline mixture. Of them make the dough, which thoroughly wipe the fur. Such cleaning eliminates the yellowness from white fur. After drying, the thing needs to smoke.

White fur so that they are not grathers, wipe the hydrogen peroxide solution (1 tbsp. Spoon on 1 liter of water). Fur, which are already the wishes, clean a slightly stronger solution, but only at the top of the wool, so as not to damage the skin

How to clean white fur with flour and starch

Over time, products made of natural fur lose their initial View. The fur itself may look new, but the color change spoils everything. Also, needlewomen decide to use the skins of old fur to create new things. And now it is often necessary to paint the fur, thereby updating it appearance. The country of tips will tell how to paint the fur at home.

To paint the fur at home, you will need certain materials. But for starters, the fur should be prepared for painting. As fur hair Maybe fat or dirty, the paint will not penetrate into his depths. As a result, you will get a fur with unpainted places. Therefore, the fur should be washed and cleaned from fat, for what they do water solution (35-38 ° C). On one liter of water, 20 g of salts should be taken, 2-3 g of ammonia 25%, 1 g of detergent, 1-2 g of food soda. Machine skins for 1 hour, time from time to stirring them. An hour later, they should be squeezed, and then rinse well in clean water.

Spots with fur are removed, wiped with a cotton swab, moistened special mortar. Here are two recipes for the choice: 1) equal parts of the denatured alcohol and ammonia water; 2) one part of ammonia water, 3 parts crash salt and 50 parts of water. Watering furwashes with a clean linen towel, select and disperse.

Fat stains are removed by rubbing the fur in one direction with a cloth moistened with a purified gasoline or a special stain remover. You can flush foam stains from soapy chips. The solution or foam rubbed the brush into the fur, trying not to moisturize the skin. Then the place where there was a stain, washed with water room temperature. The fur is dried, knock off the twist or comb.

Also, spots from fat and sweat can be removed with a solution of ammonic alcohol and a cook salt in water (1h.l. alcohol and 3h.l. Salts by 0.5 liters of water). A rag moistened in this liquid is wiped with a contaminated place.

---- If the fur was crumpled, wipe it with a wet sponge, so that the villi was wet. Then the fur extends in the direction of the pile and hang to dry. When driving, select.

If from irregular drying or for another reason, the elasticity of the ebb is lost, moisten it with a solution containing 1 tbsp. acetic essence and 50 grams of cook salt on a liter of water, from and stretch in different areas. Operation Repeat several times with interruptions of 2-3 hours, after which the fur is dried, repeated again and lubricate the fat emulsion (to 100 grams of soap dissolved in a small amount of warm water, add 100 grams of fish oil, 15-20 drops of ammonia alcohol and, Mixing, add another 1 liter of water). Furious thing Fold in half (Mezer to Mezer), to withstand for 3-4 hours, then deploying, dry when room temperatureFrost and stretch in different directions.

Small frosters of fur, expressing seams squeeze on the side of the Matte cotton threads No. 60-80 looping seam, refueling hair inside the fur. If you have to stake with front face, carefully disperse the fur at the place of gap and, holding the hair, squeeze this place simple seam Through the edge .------------------------------

If your hat has lost the shape, it means to cut the enemy fur. Take 2 st. Supplies of vinegar, 3 p. Supplies of salt and spread in 1 liter of water. Apply the resulting solution to the surface and stretch the product in different sides. Procedure should be done twice with an interval of 3 hours. Further wait for the product drying and lubricate it with such an emulsion - on 1 liter of water 100 grams of soap and castor Oil, 20 drops of ammonia alcohol.

Causes of fur cholesis and ways to deal with this

Product is light fur It looks incredibly beautiful, but possesses one drawback: it turns yellow. Therefore, it is important to know how to clean the white fur from yellowness at home.

This problem concerns both natural fur and artificial. Over time, under the influence of ambient, Villins lose their former whiteness. You can return the original color, below you will learn how to do it right.

Before proceeding with the procedure for the collar object, you need to understand why it happens to try to prevent this.

Natural or artificial fur turns on equal reasons, namely:

• the product from fur does not tolerate contact with water, so it is not recommended to wear it in rainy or cloudy weather. The presence of moisture on the pile leads to its yellowing;
• incorrect storage in the closet. Fur must only be stored in special cases, so it will be possible to protect it from dust falling;
• contact with human skin, namely, then leads to the appearance of yellow spots.

Dry cleaning services are pretty expensive and not everyone can afford it, but some funds that are in every home will easily make similar cleaning.

For cleaning, they will need sawdust (without a resin) and purified gasoline.

1. Sawdust is poured into the basin, a small amount of gasoline is added to them and everything is mixed.
2. The product from fur is placed in this pelvis and as it would be erased in this mixture.
3. After the procedure is completed, the product shakes up and combed with a special brush.

Such a mixture is suitable for cleaning any fur, whether it is a black fur, chinchilla or mink.

Sometimes instead of gasoline in sawdust add alcohol, it gives a similar effect.

You can clean natural fur with a bite, and some recommend using a undisputed essence. Cotton pad Or the clean rag is wetted in the liquid and the fur product is wiped. Movement must be performed in the direction of the pile. Vinegar perfectly removes dust and other pollution, without harming natural fur. It is not recommended to clean the artificial pile of such a solution.

Everything is known that natural fur wash can not, but artificial can be. Undoubtedly, it is necessary to do it very carefully, without pressing and not twisting the product.

Artificial fur can be erased even in washing machine Using cleaning products, most importantly, set a delicate mode.

But natural fur can also be washed a little.

1. For this prepare soap solution, better using shampoo.
2. In the liquid wet the sponge and the pile is wiped.

After such treatment, the product must dry away from the sources of heating. It can be cleaned in such a way, for example, on a collar, cuffs or boots.

The product from light fur is most often cleaning with a dry way. To do this, use bulk substances - sorbents that literally absorb dirt particles. For cleaning use: semolina, soda, starch, talc.

1. The fur product is spread on a flat and clean surface.
2. The adsorbing agent and hands rub it inside the pile.
3. As soon as the sorbent changed the color and became darker, the product shakes so that his particles are left inside.
4. You need to repeat the procedure until the sorbent remains white.

It is necessary to shake the product thoroughly, the remaining particles of the bulk substance can provoke the appearance of insects. To make it most effectively use a comb with a soft pile.

Fur is cleaned, but the yellowness remained? Despite the fact that for a white pile is natural process, I can still slow down it. To do this, first of all - the product needs to be properly stored, to clean and wear it regularly.

To eliminate yellowness prepare the following solution:

1. A small amount of water is mixed with a hayline bottle of hydrogen peroxide.
2. The liquid is poured into the pulverizer and with the help of it spray the product.
3. After applying a whitening solution, the product hangs dry.
4. Then it is carefully combed and removed into the closet.

In this way, you can clean both natural fur and artificial.

Hydrogen peroxide is also mixed with a talc or starch before the formation of a homogeneous mass. The resulting mixture is applied to the fur and evenly distributed throughout the product. As soon as the mixture is dry, it is written to a special brush for fur.

Treatment with hydrogen peroxide allows you to brighten the product for several tones, removing unpleasant yellow tint. At the same time it is suitable for cleaning both fur and light sheep.

Most artificial fur products can be erased, but pre-examine the tag to not spoil the fur.

You can whiten the artificial pile using hydrogen peroxide, talc or flour.

But gasoline is not suitable for all products, artificial doodle can not be cleaned.

Remove the yellowness and remove the stains from the tonalnics will help lemon juice, divorced in water in a 1: 1 ratio.

The product that was not able to whiten will have to repaint.

Video: How to clean white fur from yellowness?

If you want a snow-white fur to remain as long as possible, then they must care for him. You need to clean any fur regularly, be it muton or mink.

• do not use the brush from the hard pile brush, so you can damage the product;
• if the fur of the wet, be sure to carefully dry away from the artificial sources of heat;
• keep the fur product is needed in a special case or with blue fabric, which will not allow him to yellow;
• be sure to use money from moth;
• clean the product regularly and processed with acetic solution.

Proper care for light fur will allow him for a long time to delight your whiteness.

Is it possible to whiten other white clothes in this way of bleaching.

Copying site materials is allowed

only after agreeing with the administration.

On women's forums, you can often see the complaints of the owners of fur winter hats or white coats that fur over time yellow. As a rule, the fur coat begins to shut up after several seasons socks. In this regard, a natural question arises:

• why does natural fur with time yellow?
• how to remove yellowness from fur?
• how to whiten the fur at home?
• how to clean the yellowed fur?

That is why we decided to help them solve this problem. After all, not everyone knows that there are several proven ways to clean snow-white natural fur coats or other fur products at home.

Important: Do not try to delete yourself to get rid of the yellowness of the bright or white fur of expensive exclusive fur coats, for example, mink. Such a fur coat is better to give in dry cleaning. Professionals for working with furs, they certainly know how to do it professionally and without unforeseen consequences.

If your fur coat is not new and it is from rabbit, muton or fox, you can start bleaching, but be extremely attentive and strictly follow the instructions below!

The photo below shows how the product of light fur looks like a few seasons after the purchase. Surely you noticed that fur gives yellow, but it is corrected. Below are the recipes and means for cleaning the fur.

Frightened natural fox fur

How to whiten the yellowed fur

So how to make the yellow white fur? You can clean it at home with the help of some people's ways:

1. Spread the fur product on a flat surface and straightens it so that it remains as few folds as possible.
2. Sprinkle fur with any absorbent that will behave all the dust and contamination with fur. As an absorbent substance, you can use ordinary potato starch or semolina. So that the absorbent is well distributed over the entire length of the fur, carefully wrap the fur in the hands between the palms.
3. After 30 minutes, shake the fur coat and extend the fur with a brush.

Note: Starch, flour or manca, heated on a dry hot frying pan coped well with whitening of fur rabbit and fox. You need to distribute food products yet hot.

Tools for bleaching

• Treat fur with a solution ( table vinegar + Lemon juice) who need to wipe the fur with semi-robes with a brush, and then dry the product outdoors. Also, to remove the yellow coat yellowness, you can prepare the following solution: Mix in an equal ratio of 3% hydrogen peroxide with water and ammonia. Take the sponge, lower it into the solution, squeeze, and wipe the fur in the direction of its growth. As soon as you finish bleaching fur, drag the product for drying. It is best to leave it to dry out in the fresh air, but not outdoor sun.
• Another folk remedy - This is bran. With their help, you can clean small contamination. To do this, heal them in a pan and sprinkle them the contaminated fate of the product, slightly rubbing them into the pile.
• You can whiten the yellowed fur with chalk. To do this, grind it and distribute on the surface of the fur, slightly rubbing it between the pile, then shake the fur coat.

IMPORTANT: After cleaning the fur coats, any of the above folk methodsIt must be carefully knocked out and combing a fur brushing that can be bought in a retailer or pet store.

Fat stains on a fur coat can be cleaned with a gasoline with starch, mixing them between themselves. Apply the resulting mass to the fatty fur and wait about half an hour. Sharp the remains of starch, and the fur coat itself will ventilate so that the gasoline pairs will disappear.

As you can see, in order to whiten the fur coat or expensive penette collar at home, you can use many various methods. However, take note that it is not possible to get rid of the yellowness for a long time, but you can remove it for a while.

Cleaning lining

to wrap the lining of the fur coats, it needs to be accurately fasten, after which it is necessary to compare with the condition of the manufacturer's recommendation. If you do not take into account the characteristics of the fabric, it can be irrevocably spoiled. It can squeeze and decrease in size.

White mink products in the process of socks quickly lose their attractive snow-white tint. Under the influence of environmental factors, fur acquires yellowFrom which it is difficult to get rid of. To minks from yellowness at home, you can independently prepare an effective tool. As components for the bleach, hydrogen peroxide will be useful, ammonia, vinegar, blue, lemon acid And other active componentsallowing you to quickly return the primordial appearance of white fur.

Clear mink fur at home can be used with dry whitening methods. For this, substances are used well absorbing the surplus of moisture, dirt, removing the dusty flare. As dry bleach, such gentle components are used as:

• semolina;
• starch;
• talc;
• bran;
• sawdust.

The main feature of such a cleaning technique is that it does not require the use of fluid, so the product will not need dry.

Semolina

Manki grains perfectly absorb dirt, and also remove dust. For processing, the product should be placed on the table or pure semi. If the semolina must be cleaned with a hat, it needs to be put on a three-liter bottle, wrapped with a towel.

Clean the fur semitting the manual follows:

1. Problem areas sprinkle with a small amount of semolina.
2. The entire surface is neatly combed with a brush with a soft bristle.
3. After the manka becomes gray, it is removed. If necessary, cleaning can be reused.

You can remove the semolina, changing the product, or putting it. In the latter case, only weak devices should use.

Gasoline-based mixtures

Credit with yellowing will help the mass prepared from potato starch and gasoline. Both components are stirred before the appearance of a casual mass. The mixture is distributed over all contaminated areas and leave until complete drying. The fur is neatly combed using a ridge with small teeth. If desired, remove the applied agent can be a small power vacuum cleaner.

Another one effective tool are wood sawdust impregnated with a small amount of gasoline. The resulting means is distributed over the yellowed pile, and then neatly rubbing in the product and leave 2 hours. The sawdust shake, and the pile is neatly combed the ridge.

Wheat bran

The fur column can be cleaned with wheat bran heated to 60 degrees. The product is heated on a pure pan, while it should be stirred regularly. Hot bran puffed with a uniform layer onto a pile, and then carefully rub in it with a soft brush.

Delete the applied tool should only after its complete cooling. To remove small particles, the bran must be performed to make a pile of crest with small teeth.

Talc, chalk, combed using the ridge

Clear from dirt and dust a fur coat or cap will help a white talc, which is poured on the product with a uniform layer. The ingredient is neatly rubbed into the pile with a brush or fingers. After 2 hours, the talc shakes, and its residues are combed with a special brush.

A similar way to clean the fur coat or cap can be used chalk or potato starch. For processing, a chalk powder is used, which can be bought or prepared independently, grinding a bar.

Wet solo solutions

In addition to dry methods to combat the yellowing of fur, there are wet ways. They are to use funds prepared on the basis of active liquid components. After such a cleaning, the fur product should be dried or cleaned by a wet sponge, moistened with a wet sponge.

Need to dry the product only natural way, waving it on her shoulders or stands. From drying near batteries, other sources of heat or ironing, the iron should be completely abandoned, since such an impact can damage the fur.

Hydrogen peroxide and ammonia alcohol

It is possible to quickly and effectively clean the white mink fur from yellowness using a mixture of hydrogen peroxide and ammonia. To prepare a means, it is necessary to make a solution of 1 teaspoon. 3% solution of hydrogen peroxide and 1 glasses of water. In the resulting liquid, 3-5 drops of ammonia alcohol are added, everything is mixed thoroughly.

Apply bleaching fluid on fur is required carefully, with the help of cotton balls. After processing, the product is combed and dried outdoors. You can spend the product on the balcony if it is glazed, the window should be minimized a bit.

Soap mortar

There are several ways to clean the white fur. yellow Nalea with soap solutions. Each of them has its own characteristics.

1. As a cleaning agent, you can use shampoo for pets. The composition of these means includes a blue coloring pigment, which allows you to completely neutralize the yellow shade. The pelvis is filled with warm water, it dissolves a small amount of pet shampoo in it. To enhance the effect into the solution, you can add 2 tablespoons of hydrogen peroxide. The fur product is required to neatly treat a sponge dipped in the cooked agent. The sponge should be conducted in the direction of the pile. After the procedure, the fur is washed with a damp cloth and dried.
2. If the yellow shade is unsaturated, you can cope with it using conventional liquid soap. Detergent must have white color Or be transparent. In the pelvis with water add 3 drops of liquid soap, the water thoroughly foam. Clean sponge wetted in soap solution, pressed. The pile is wiping with a damp sponge several times, combing and dried.

Liquid soap can be replaced with shampoo or gel for the shower, which does not include coloring pigment.

Blue

In this way, not only natural fur can be purified, but also artificial. Use this tool is very careful, as its excess can lead to the appearance purple shade On the pile.

A small amount of blue sink is dissolved in the pelvis so that the liquid acquires a pale blue shade. The resulting composition is transferred to the pulverizer. The remedy is sprayed with a smooth layer on the whole fur product. The applied solution does not require flushing. After processing the fur, dried, and then carefully combed.

Alcohol and Sol.

To prepare bleaching fluid, you must dissolve 1 teaspo shallow salt In a glass of warm water. IN saline Add 1 teaspoon of the ammonic alcohol, everything is stirred and used for cleansing.

1. The sponge is wetted in alcohol solution, and then it is treated with the entire yellowed surface.
2. The product is dried in the fresh air so that the smell of the ammonic alcohol is completely blew.
3. Complete the procedure for combing pile.

When removing a weak yellow shade from using the ammonia alcohol, it is possible to refuse, processing the pile of salt solution.

Cinema with lemon juice

This means effectively removes yellow spots On the pile. It should be used point, avoiding the processing of the entire fur product. For the preparation of the means you need to mix 1 teaspoon of vinegar and a quarters of the quarters of the lemon.

The cotton swab is wetted in the cooked liquid, and then with the help of it, all the stains that appeared are wiped. The yellowness is gently wiped with a brush with a soft bristle, and then fur dried.

Any described method will allow you to quickly and effectively eliminate the yellow shade on the product made of mink fur. Applying these funds should be very neat, avoiding strong mechanical impact On the pile or its excessive wetting by cooked liquids. Otherwise, the fur can lose the attractiveness of its structure, lose the shine. If in the process of cleaning the mistress did not calculate the number remedy, and the fur product lost its attractive view, Return the brilliance of the vorsa can with the help of its wiping with a 10% glycerol solution.