How to make a snow maiden with your own hands from fabric. Do-it-yourself children's crafts Snow Maiden - master classes in kindergarten and school. Making Santa Claus

08.04.2019

Want to do do-it-yourself Snow Maiden costume or a Christmas tree toy in the form New Year's beauty? We will gladly help you in this matter. See our craft options.

DIY Snow Maiden: ideas

Candy variant.

Necessary materials:

White and blue crepe paper
- finished doll
- white felt
- white and blue satin ribbons
- chocolate candies with blue wrappers
- snowflakes, stars, beads for decoration
- white or blue lace
- glue gun
- scissors
- toothpicks
- Double-sided tape
- frame in the form of a bell for a removable skirt (foam)

Manufacturing process:

1. The frame for the skirt can be made by yourself. To do this, take 4 foam rectangles, glue them together, and glue a circle cut out of foam from below. Cut the corners with a knife, form a bell.
2. Take the glue gun and pasting blanks and get to work. For the skirt itself, cut out a rectangle that fits the size of the bell skirt. Make even folds in the upper part, glue them to the frame.
3. Cut out a dress from the rectangles in the same way. It is convenient to model it on the doll itself. To do this, glue pieces of corrugated paper together, rounding and wavy at the bottom of the dress. From the braid, model the collar with your hands.
4. Braid the doll with white and blue ribbon.

5. Use white felt for the hat. Make a hat in the form of a cylinder, decorate with sequins, beads, corrugated paper.
6. Make a surprise edge for the dress. Decorate the bottom of the skirt with white roses, inside each of them there will be a candy.
7. Candy roses are made according to this principle. Wrap each candy in clear wrapping paper. For each candy, cut out a small square, attach it with double-sided tape to a toothpick. Now make your own roses. Cut strips with a width of 5 cm. From these strips - rectangles with a height of 6.5 cm. Round the corners of the rectangle so that you get a petal. Round the upper part of the petal with a skewer, stretch the middle a little. Glue the petals one at a time on both sides. You should get a rosette with 8-10 petals. For the sepals, use dark blue paper. Take a piece with a height of 7 cm, cut out blanks in the form of grass, slightly round the ends, glue to the rose.
8. You should have 9 roses. Insert them into the bell skirt at the bottom.
9. Place the Snow Maiden on a stand made of corrugated cardboard. Scatter the rest of the candy randomly on the base.
10. Decorate the dress with beads and stars.

How to make a Snow Maiden with your own hands

You will need:

Quilling tool
- lumograph
- scissors
- PVA glue
- colored paper
- quilling strips

Manufacturing process:

1. paper strip fasten to the tool, tightly twist the roll with a diameter of 1.5-2 cm. Measure the size of the workpiece with a lumograph.
2. Remove the roll from the tool, holding it with your fingers so that it does not bloom, glue the free end. The resulting blank will become the head of your craft.

3. Twist 6 identical rolls - 1 for the neck and 5 for the crown.
4. Glue 5 rolls together, glue to the head.
5. 6 roll glue in place of the neck.
6. Make figurines for the Snow Maiden outfit. First, roll loose rolls (10 cm in diameter).
7. Squeeze the blanks with your fingers, give each a “drop” shape.
8. Build a regular frame from blue paper, fix it with glue.
9. Glue the finished “drops” over the cone, leaving no free voids. Be sure to follow a certain sequence - a drawing of a row. As a result, you will get an attractive result. As soon as your Snow Maiden's outfit dries, glue the head to the body.

10. If during the work you have formed voids, fill them with small rolls. Twist ordinary rolls, glue the free end.
11. Lubricate the parts with glue, fill in the voids.
12. While the glue dries, make the wings. Twist a few free rolls, fix the ends.
13. Using your fingers, give suitable shape- leaves and drops.

14. In addition, you will need curls Pink colour. To do this, take 2 strips of 12 cm each, bend them, wind them on each side, straighten, attach desired shape. Glue the parts together to get 2 wings.
15. Glue the wings on the back, let dry completely.

How to sew a snow maiden with your own hands.

Necessary materials:

4 felt colors
- threads by color
- beads
- filler
- pattern

Manufacturing process:

1. On paper sheet print the pattern. Cut out all the details along the contour.

Do-it-yourself snow maiden pattern:

2. Fold the dark blue felt in half, pin the pattern on top.
3. On white felt in one layer, arrange the patterns of the necessary details - fur, mittens, hair.
4. Place the remaining details on the blue felt.
5. Start work from the front of the toy. Sew all the details with hand stitches, fill them in. Pin the blue part of the fur coat to the base with pins.
6. Sew on with hand stitches. Leave a small hole to fill the part.
7. Prepare any filler.
8. Stuff the part, sew to the end with hand stitches.
9. On the other hand, sew another, fill it.
10. Go to the face: sew it on top, and on it - the hair. Decorate your hair with a ribbon.
11. Sew on the fake collar.
12. Baste stitch with white thread to highlight the hands.
13. Sew mittens in the same way. Prepare the tape white color, hang toys on the Christmas tree.

14. Using a pin, pin the tape to Right place.
15. Hand stitches sew on back crafts.
16. Fill the Snow Maiden with filler.
17. There are only a few strokes left: embroider jewelry on the collar with blue threads, draw hair and bangs, sew on beaded hair clips. Embroider eyes, mouth and nose. Embroider snowflakes on a hat and coat.

Snow Maiden do-it-yourself photo:

Textile craft.

Necessary materials:

Yarn and needle for felting
- scissors, needle, thread
- white and red acrylic paints
- white faux fur
- white fabric
- blue fleece

Manufacturing process:

1. Lay out the pattern on white cloth- this will be the body of the future crafts.

2. Cut out a fur coat from blue fleece.
3. After you have sewn the fur coat and the body, proceed to the fact that you will fill the details with padding polyester. You need to hit carefully. Before stuffing, carefully tear the synthetic winterizer with your hands so that it is lush.
4. Start decorating the toy. Using a needle for felting, roll a braid on it. Decorate the hat and coat with white fur. Draw boots with white acrylic paints. Draw snowflakes on a fur coat with white paint.

Do-it-yourself Snow Maiden costume photo:

A bottle of champagne in the shape of a Snow Maiden.

Necessary materials:

bottle of champagne
- blue satin
- glue "Moment"
- openwork braid

Manufacturing process:

1. Start decorating a bottle of champagne from above. To do this, take a kosobeyka blue color, measure a strip of the required length. Drop a few drops of Moment glue on it, glue it.
2. Cut off the next strip, try it on, glue it on the previous strip. Glue 6 rows of strips in the same way.
3. Starting from the middle to the bottom, wrap the entire bottle. Apply glue to the bottle itself. After attaching the braid from the bottom, go back to the top, glue a few more strips.
4. There was an unglued gap at the back of the bottle. Take an openwork braid, cut a strip of a suitable length from it, carefully glue it. Carefully remove the droplets of glue with a clean cloth.
5. Glue another strip of openwork braid.
6. Start making a skirt. To do this, take the blue material, cut out a rectangle. Process side edges. If the material turned out to be loose, process the edges with a zigzag.
7. Sew an openwork braid to the bottom edge.
8. Gather a blue skirt with a needle and thread, sew it to a bottle of champagne. Cut a narrow strip from the synthetic winterizer, glue it on the skirt.
9. Cut another strip from the filler, longer, decorate it with " upper part" skirts. Glue the fluffy strip carefully. Grab it with blue threads.
10. Make pigtails from the same synthetic winterizer. Cut the strip into 6 parts, braid the pigtails, tie the ribbons.
11. Form a small hat, glue it on your head.
12. Make a crown from openwork braid. Lay one string on top of the other.
13. Divide the circle, make a crown, attach to the head.

Crafts in papier-mâché technique.

Necessary materials:

brushes
- acrylic paints
- paper egg containers
- PVA glue
- white yarn
- aluminum wire 14 and 4 cm
- hot glue gun
- "paper pulp"

Manufacturing process:

1. Prepare the “paper pulp”: tear the egg packaging into pieces, put it in a deep container, fill it with water for 3 days, boil, cool, wring it out with your hands, add 200 g of glue, knead the dough.
2. With awl, hot glue, wire, roof and plastic cups make a frame. Lubricate it with glue, apply a layer of " paper pulp". This must be done from below.
3. Bring the figure to desired shape, level the surface by slapping index finger, complete with small details, thick fishing line and beads. Blind the crown separately. Leave to dry for 3 days.

4. Prime the workpiece with paint.
5. Make hair out of white yarn, glue it with hot glue.
6. Put on a crown, braid a braid, decorate figures with tinsel, rhinestones, beads. Make a veil from Hansa fabric.

It turns out very beautiful and

We hope that you liked our master classes, and you are already making a list necessary materials to make them! We wish you good luck and creative success!

If there are no traditional characters under the Christmas tree - the symbols of this holiday? Therefore, we suggest that you familiarize yourself with several master classes on how to make Santa Claus and the Snow Maiden with your own hands from paper, bottles and other materials.

How to make a Snow Maiden craft?

There are two ways to create a granddaughter of Santa Claus, depending on the materials chosen - simple and complex.

Simple methods include the following options:

paper;
plastic bottle;
ribbons and glass bottle;
finished doll.

More complex options include options using fabric and thread. Since in the first case it is proposed to sew the Snow Maiden on her own, and in the second - to tie.

No matter how you decide to make your Snow Maiden, the craft will turn out cute and unique.

Snow Maiden from a doll

To create such a craft, a finished doll is required. The most commonly used is an old Barbie or similar toy. Therefore, the main process is to create a girl's outfit.

For the master class, in addition to the doll, you will need to take:

blue crepe paper;
thin ribbons of blue and white;
thin lace in two shades;
small decor for the granddaughter's finished outfit (for example, stars, beads and beads, rhinestones, etc.);
a piece of white felt;
a piece of foam;
scissors;
stationery knife;
glue gun.

Making a frame

In order for the doll to be stable and the skirt fluffy, you need to make a frame. To do this, take the foam. In height, it should be equal to the length of the legs of the selected toy.

In the center of a piece of foam, carefully cut a round hole into which you can then put the doll. Remember that she should not stagger. Then cut out a circle of arbitrary diameter from thick cardboard. Splendor depends on its size future skirt. Ready circle glue to the bottom of the foam. Now grind the piece on all sides to make a cone. The frame is ready.

The process of creating an order

Step-by-step instructions on how to make a Snow Maiden with your own hands:

Beautiful Snow Maiden is ready!

How to make a Snow Maiden out of paper?

From plain paper voluminous crafts Snow Maidens can be made in several ways. For example, using a cone as a basis.

To do this, take a piece of white thick paper. You can use both cardboard and landscape sheet. Roll it up so that the cone comes out. Glue the edges so that the figure does not unfold.

Cut the bottom of the cone half a centimeter with scissors. The cuts must be made very close to each other to make a fringe. Cut a very thin strip of white paper and cut one side in the same way.

Draw a cone. Cover some with blue paint. This will be the outfit. Leave the top white. There you need to draw eyes, a nose, a mouth and a blush. On the outfit itself, draw the handles and mittens. Do not forget to depict the hairstyle and braid.

Cut a few pieces from the fringed strip and glue them down the center of the cone and also on the top of the mittens.

Cut out a kokoshnik from cardboard. Paint it and decorate with rhinestones or sequins. Cut out triangles in the center of the kokoshnik and put it on the head of the Snow Maiden.

Craft from a blank

Instructions on how to make a Snow Maiden out of paper:

Take a sheet of cardboard and a pencil.
Draw an outline on paper, as in the picture below.
Cut out the part along the outline.
Fold the left and right flaps inwards.
Paint the craft. Draw a face, braid, kokoshnik. Decorate the outfit of the Snow Maiden.
Take cotton wool and PVA glue.
Tear off small pieces of cotton wool and glue them on the mittens and the edges of the fur coat.

The craft is ready! Such a Snow Maiden can be used as a figurine and as a postcard.

To make Santa Claus and the Snow Maiden out of paper the same, take the same blank and change the top to a semicircle. Assemble in the same way and decorate like Santa Claus. Then you will have a complete set.

Origami - granddaughter of Santa Claus

To collect such a cute Snow Maiden, you will need to take:

one sheet of blue square paper;
a small sheet of blue rectangular paper;
two identical small square blue leaves;
one medium square sheet of beige or yellow;
white strip of paper no more than two centimeters.

All paper should be chosen so that it is white on the back. If there is none, then just glue the colored sheet to the white one.

Master class on how to make a Snow Maiden with your own hands using the origami technique:

Take the largest square piece of paper and fold it in half.
Unfold the sheet and fold it in half again.
When you unfold the paper again, you should have two folds that form a cross.
Now wrap up with two opposite sides half an inch of paper.
Bend the paper at the bottom a couple of centimeters.
Wrap the upper left and right corners to the center fold line.
Turn left and right side crafts as shown in the picture.
Bend back the top corner of the resulting figure.
Fold the bottom left and right corners up.
Flip the shape again reverse side.
Take a thin strip of white paper and fold it in half lengthwise.
Unfold the sheet and fold it to the right and left side to the fold formed in the middle.
Paste the resulting strip into the previous shape. To do this, slip the top under the upper triangle, and the bottom under the strip below. You have got an outfit for the Snow Maiden.

Folding our heads

Take a square sheet of yellow or white paper and fold it in half diagonally. Expand the sheet.
Now wrap the left and right sides to the formed line. Repeat this action one more time.
Fold the shape diagonally.
Bend back the top of the folded triangle a little.
Flip the workpiece over.
Fold the long triangle in half.
Turn the workpiece over again. Now the head is ready.

Making mittens

Mittens are assembled from two identical and small blue squares.

Take one square, fold it in half diagonally.
Expand the shape.
Fold over the left and right sides so that their tops touch the fold line.
Slightly unscrew one of the corners.
Turn the piece over.

You've got a glove. Make another one in the same way.

We fold the hat and collect the figurine

Take a blue rectangular piece of paper and fold it in half.
Unfold the sheet and fold it in half again so that when you open it again, a cross is formed from the fold lines.
Lay the rectangle lengthwise and fold the top to the bottom.
Fold the left and right corners to the center fold line.
Tuck the top corner in a little.
Bend a thin strip at the bottom.
Flip the figurine. Now you have a hat.

When all the details of the craft are ready, they need to be assembled with each other. To do this, simply lay all the elements on the very first blank and glue them with PVA glue.

Plastic Snow Maiden

Description of how to make a Snow Maiden from plastic bottle with the help of improvised materials:

Get an empty yogurt bottle. Such a container perfectly imitates the figure of a girl.
Make a ball out of cotton wool and cover it with papier-mâché paper.
Cover the bottle with blue paper.
From the same paper, make two small cones and push cotton wool into them. These will be the hands.
Glue the head and arms to the bottle. Paint the head. Draw a face, outline the hat in blue.
Make a braid out of the threads and glue it to the edge of the hat.
From cotton wool, make an edge on the outfit of the Snow Maiden and her headdress. The girl is ready!

And how to make a Snow Maiden from a plastic bottle?

Santa Claus and Snow Maiden made of plastic

Prepare two plastic bottles- one more, the other smaller. Also take cotton wool or two ribbons, woolen threads, glue, scissors, paints and brushes.

And now a master class on how to make Santa Claus and the Snow Maiden with your own hands:

Clean plastic bottles from labels and cover with cotton. To do this, pour PVA glue into a container (for example, a plate) and dip small pieces of cotton wool or cotton pads. Then apply the material to the entire surface of the bottle. Layers must be uniform throughout. You need to paste over the bottle along with the cork.
Wait until the glue is completely dry. This can take a long time, so it's best to use a hair dryer.
Glue the pieces of cotton together into a roll and glue to the bottle on both sides. These will be the hands of the figurines.
When the mannequins are ready, cover them with the appropriate paint - the Snow Maiden is blue, and Santa Claus is red. The area with the lid needs to be painted beige paint, because there will be a face. In this case, the top of the cover is painted in the same color as the body.
Let the paint dry. If necessary, apply a second layer.
Now you need to make the fur trim of the outfit from cotton wool. Just tightly glue the places where the edge should be (sleeves, the central part of the coat, the bottom of the hat and robe) with glue and attach pieces of cotton wool.
Draw eyes, nose and mouth on the face.
From woolen threads weave voluminous braid and glue under the Snow Maiden's hat.
Make a beard for Santa Claus from cotton wool. This is done in the same way as the edge.
Tie ribbons of matching colors onto figurines.

Santa Claus and Snow Maiden are ready!

Outfit of the Snow Maiden for champagne

You can make not only the Snow Maiden craft, but also dress up a bottle of champagne in such a costume, which can decorate New Year's table. Moreover, the empty container can then be used as the granddaughter of Santa Claus herself.

Detailed instructions on how to make a Snow Maiden from:

Peel off the paper label from the bottle.
Take blue ribbon medium width and a glue gun.
Make one turn around the bottle, stepping back a little from the foil.
The coil should go a little at an angle so that a triangle is formed - a cutout.
Cut off the excess tape and glue the edges to the bottle with a glue gun. Attach the tape to the back in the same way by placing a dot of glue on the glass.
Similarly, make a few more turns - five or six. Each next row should slightly overlap the previous one.
Now wind the tape around the bottle horizontally and connect the ends with glue.
Also make a few rows to the end.
Take some synthetic winterizer and make a frame for the top of the outfit and overlap the seam of the ribbon rows with it.
Glue rhinestones or beads along the outer contour of the synthetic winterizer edge and at the bottom of the fur coat.
From thin strips of synthetic winterizer make a pigtail.
Wrap the tape several times around the cork and secure the rows together with a glue gun. Wrap the construction with a piece of synthetic winterizer and glue the rhinestones. This will be the hat. It should not tightly fit the cork.
Glue the braid inside the hat.

Outfit is ready!

Similarly, you can do Santa Claus. Just use the red tape for this.

Snow Maiden from disposable spoons. Master Class

Master class craft "On a silver meadow"

Handicraft master class (paper crafts, crafts from waste material).
Author: Lyubov Anatolyevna Tuchkova kindergarten Moshkovsky district, Novosibirsk region.
IN this master class presented step-by-step instruction performing volumetric crafts from napkins and plastic spoons. This material is suitable for making jewelry group room with older children preschool age. Also for teachers and parents.
Target: to teach children how to make voluminous crafts for the New Year from improvised material, using paper napkins and disposable spoons.
Tasks:
educational: to teach children how to make voluminous crafts for the New Year from improvised material using disposable spoons and paper napkins.
developing: to develop fine motor skills of hands, to promote the development of imagination, attention, perseverance in children.
(b) educators: to instill a love of children for manual labor.
"Christmas story".
One early morning Santa Claus woke up in his fairy-tale palace. He looked at the calendar, and there was only one leaf, December 31st. “What should I do?”, - the children in kindergarten will soon have a Christmas tree, “but I didn’t prepare gifts for them.”
Santa Claus called all his granddaughters Snow Maidens to a silver meadow and ordered them to collect a bag with gifts for the guys.
The Snow Maidens reassured Santa Claus that they would have time to complete everything before the New Year.
And in memory of this day, they took a photo.

Equipment: paper napkins, disposable spoons, plasticine, Christmas tree rain threads.

Progress:
We take a spoon and half a bar of plasticine. We set the spoon on a block of plasticine, as on a stand.

We take a napkin, fold it in half so that the center of the napkin is the top.

Fold the napkin in half again.

Cut off the bottom of the napkin.

Cut off the corner of the napkin. We remove the spoon from the stand and put the napkins into the upper hole.

We tighten the skirt with a thread of rain. We make another skirt and also pull it together on a spoon.

We take another napkin and make a collar, folding it across and folding it like a pot.

Pull the collar over the skirt.

On a plasticine spoon we make eyes, bangs, mouth and eyebrows.

We make a braid from threads, a crown from paper. We glue.

We put the resulting crown on a spoon. Here we have such a snow maiden.

Ball of the Snow Maiden.

To please family and friends pleasant surprise, it is not necessary to buy it in the store for exorbitant prices. Try to make a toy with your own hands with minimal cost money and time.

Here we provide a master class on making a New Year's toy from cotton wool with your own hands.

New Year holidays are an amazing time of magic and miracle, the time of fulfillment of desires. At any Russian family Christmas trees are decorated with toys at this time. Traditions have developed so that we always put Santa Claus and the Snow Maiden under the Christmas tree. All of you probably remember the nice little toys made of cotton wool, made by our grandparents. Let's look at the technique of making toys from cotton wool.

Christmas decorations can be made from cardboard, paper, a plastic bottle or cotton wool. We present you a simplified version of the manufacture of the Snow Maiden from cotton wool.

To make an unusual fake in the form of a Snow Maiden from cotton wool, you will need the following materials:

Cotton wool;
Wire for creating the base;
Paper;
Brushes for coloring toys;
Paints;
PVA glue;
Jewelry - beads, sequins.
Potato starch (1 tablespoon);
Wooden stand.

We will make crafts in three stages:

Prepare the base of the wire and glue it with cotton wool;
Let's make the head of the Snow Maiden and draw the face;
Let's color the resulting toy.

First, we make the base of the wire and connect it to the stand. As a stand, you can use any material made of wood or plastic.

We prepare glue from starch - potato starch dilute in cold water, mix thoroughly until all lumps disappear and pour 200 milliliters boiled water. Cotton wool is sorted into stripes. We generously lubricate each strip of cotton wool with the resulting paste and wind it on the frame, carefully spreading it along the length. We impose cotton wool to the required volume.

Do not forget to thickly cover the cotton wool with glue to form a strong crust. At this stage, it is necessary to dry the blanks at the battery for one or two days. For a clearer expression of the contour, you can re-paste the frame. I am giving you an example of the resulting workpiece.

To make the head and face, you need to pick up a doll or figurine. We prepare several layers of paper and coat each with PVA glue. Wet the base with water so that the paper does not stick. After laying all the layers of paper, let it dry and remove it.

It should be a mask. We form a hat from cotton wool, connect it with a mask and dry it thoroughly.

Snow Maiden is one of the symbols new year holiday. You can, of course, buy it in a store, but a self-made Snow Maiden is much more interesting. On this page we have selected master classes for children from kindergarten to school. After reading it, you will learn how to do crafts on New Year textile, felt, polymer clay or regular plastic bottle.

Master classes with step-by-step photos and videos on topics:

Do-it-yourself Snow Maiden from paper and cardboard, templates for cutting;
Do-it-yourself Snow Maiden: a master class from nylon tights;
Do-it-yourself Snow Maiden from fabric for the New Year 2019 (with patterns);
Snow Maiden from improvised materials, step by step with your own hands with a photo;
Do-it-yourself Snow Maiden: crafts for kindergarten, master class;
Do-it-yourself Snow Maiden: crafts to school for a competition;
Snow Maiden from threads with their own hands;
Do-it-yourself Snow Maiden from a plastic bottle - for a competition in kindergarten;
Do-it-yourself Snow Maiden from felt for the New Year, patterns

Do-it-yourself snow maiden from paper, cardboard and more: cutting templates and description

Consider the most simple ideas that even a toddler can do senior group kindergarten.

Plasticine or polymer clay

This universal option for classes manual labor in kindergarten or elementary school. "Home" children also love to sculpt.

Such a figure will take no more time than the Snow Maiden with her own hands made of paper and cardboard (there are templates for cutting on the Internet), but it looks very beautiful. Here short description action algorithm.

Roll up 10 thin "sausages" of plasticine or clay. Gather them into a cone, smooth the seams. You will get a hollow geometric figure.
Make the head of the pupa spherical, from white or light pink material.
Weave a pigtail out of thin strands of yellow clay.
Cut out a kokoshnik from colored paper or mold it from blue clay.
Decorate the figure with a contrast trim. Decorate your face with beady eyes. Outline the mouth and nose. Do wide sleeves and mittens.

Similarly, you can make other New Year's characters for an exhibition at a school or kindergarten. Or you can invite a friend and arrange home performance for the New Year: put on a familiar fairy tale or come up with a plot on your own. The Snow Maiden, Santa Claus and negative characters like Leshy and Baba Yaga will come in handy.

Cookies "Snegurochka"

Using a metal or silicone mold, you can surprise your family and guests with amazing New Year's baking. If there are no molds, prepare a template cut out of cardboard: a silhouette of a New Year's beauty. New Year's Eve dough can be store-bought or homemade with cloves, ginger, vanilla or cinnamon. Such pastries strung on sticks look interesting (wooden skewers or flat ice cream sticks are suitable for this purpose). It's a good idea to make hanging holes in baking and decorate the Christmas tree. Similar products look like this.

Gingerbread Recipe for Christmas

This is an absolutely fabulous dish, described by P. Travers in the famous book about the nanny Mary Poppins. It was precisely these gingerbreads that were traded by two giantesses in the shop of the cunning Miss Corry.

Butter - 200 g.
Eggs - 2 pcs.
Flour - 350 g.
Sugar - 200 g.
Cocoa - 2 tsp
Crushed spices: cinnamon, cloves, vanilla, ginger - a teaspoon each.
Baking powder for dough - 2 teaspoons.
Salt - a pinch.

Paint gingerbread with icing powdered sugar, egg white and drops of lemon juice.

More interesting ideas creative crafts.

Snow Maiden for the New Year from cotton pads.
original paper application. A do-it-yourself snow maiden made of paper and cardboard looks very cute: there may be other patterns for cutting. It is only important to carefully print and cut the blanks.
Snow Maiden made of paper or cardboard (3D figurine)

An interesting video with a children's master class. It will be enjoyed not only by kids, but also by mothers. The above ideas can be used on New Year's Eve in kindergarten or school for developmental activities.

Snow Maiden with her own hands from nylon tights: a master class

In the wardrobe of every woman there are nylon stockings and tights that have outlived their time. Kapron is a material with almost unlimited possibilities. Among professional and home craftswomen, the technique of sculptural sewing is popular. The technique is not easy, but very interesting. A master class from Elena Volodkevich, presented in the video, will help you figure it out.

The easiest way to make

Another Snow Maiden with her own hands from nylon tights: a simple master class, ideal even for younger students.

What do you need to work

Old nylon tights.
Sintepon for stuffing.
Scissors.
Leftover yarn.
Needle with thread.
Blue, white or blue organza bags - 2 pcs.
Marker for markings.
Pencils or markers.
Eye beads. You can replace them with accessories for dolls or make a Lalaloopsy-style Snow Maiden by sewing on button eyes.
Silk ribbon.

Description

Fold the stocking in half and carefully cut out the circle. This will be the doll's head.
Stepping back a few millimeters from the edge, lay the stitch in the “forward needle” way along the edge of the workpiece. Be sure to leave some space for stuffing.
Pull off the workpiece and fill it with padding polyester.
Make hair out of yarn, weave it with a pigtail. Sew the "hair" to the head. Decorate the braid with ribbon. You can also use a ready-made bow.
Draw a blush with pencils or felt-tip pens, attach eyes. Embroider the mouth with pink threads.
Fill one of the bags with synthetic winterizer, pull it off and sew it to the head.
Pull off the second bag and put it on the doll's head. Get a hat.

The Snow Maiden with her own hands from nylon tights is ready; We hope that the master class was useful for you.

Do-it-yourself Snow Maiden from fabric for the New Year 2019 (with patterns)

For many years, dolls made in the Tilda style have not lost their relevance. These unusual and slightly grotesque toys from Norway have conquered the whole world. Cozy, cute and completely safe, Tildas are great for kids to play with. They are also used as interior decor, adorn the collections of lovers homemade toy. You can make such a toy as a gift for the New Year at a labor lesson at school.

Before mastering the master class, a few tips for the novice master.

It is desirable to choose a natural fabric, sufficiently dense and durable. Best Options- linen and cotton, plain or with woven patterns. If you are going to sew a doll from thin material, fix a special thin seal on it with an iron. The color scheme is shades of beige, terracotta or white. This is the best imitation of skin tones.
The best option for stuffing is synthetics (synthetic winterizer, synthetic winterizer).

What is required for work

Do-it-yourself Snow Maiden for the New Year 2019 from fabric (with patterns) is made using such tools and materials.

Fabric (preferably calico or linen).
Acrylic yarn - for hair.
Thick paper for patterns.
Pieces of felt or fleece.
Threads, needle. If desired, you can sew parts on a typewriter. It is advisable to use a transparent presser foot to control the quality of the seam.
Small scissors.
Stuffing
Decor elements: beads, bows, ribbons.
Fabric marker - for drawing a contour on the fabric according to the pattern. After some time, the lines disappear or are easily erased with a moistened sponge.
Wooden stick - for stuffing parts.
Pencils.
Special dye for textiles.

Description of the master class

Print on thick paper patterns, cut them out. You will get details for the body, legs and arms of the doll.
Fold the fabric in half.
Using a marker, draw outlines on the fabric.
Cut out blanks, grind them, leaving holes for stuffing.
One of ground rules in the manufacture of tildes - dense packing. A wooden stick comes in handy here (you can use sushi utensils).
After all the details are stuffed, sew up the holes. Using blind seam, connect the parts together. The body of the doll is ready.
Make hair out of yarn. Having folded a bunch of 2-3 threads in half, sew it in the center of the head of the toy, and so - several times in the direction from the forehead to the back of the head. Get hair with a parting. The hairstyle can be done in the form of "tails" or braids fastened with ribbons.
Download patterns of clothes for Tilda and sew it. Sew mittens from felt.
Draw eyes on the doll's face. Embroider them with dark blue or black thread.
Apply a blush to your cheeks with a pencil.

Do-it-yourself Snow Maiden for the New Year 2019 from fabric (with patterns) will turn out beautiful and unusual. Who said that all "tildos" look the same? Each has its own individual character.

Do-it-yourself Snow Maiden from improvised materials (step by step with a photo)

To make New Year's toy, it is not at all necessary to spend big money on expensive materials. Consider unusual master class: Do-it-yourself Snow Maiden from improvised materials (step by step with a photo). In addition, 3 time for such a product will take quite a bit.

What will be required

Wire for the frame.
Doll head for cast.
Cotton wool.
Paper.
Acrylic paints.
Brushes.
PVA glue.
Wood stand.
Potato starch - 1 tsp
Decor (beads, beads).

Action algorithm

Complete wire frame, cover it with cotton wool.
Make a head, shape a face.
Color the finished product.

Now - a more detailed master class.

Prepare a starch paste (200 ml of boiled water per 1 tsp of starch). Dilute starch first a small amount cold water so that there are no lumps, and then - brew.
Make a wire frame, attach it to a wooden base.
Cut the cotton into strips. Wetting each strip in a starch paste, wind it on a wire base. Apply cotton wool until you get the figure of the desired volume.
Cover each layer of cotton wool with adhesive to form a dense crust.
To make a head and face, pick up a doll right size. Dilute the PVA glue with water, moisten the paper and lay it on the doll's face in several layers. After the paper is dry, remove it. Get a mask.
Form a hat from cotton wool, connect it with a mask. Dry the workpiece.
Connect the head and body.
Color the toy with acrylic paints.

The Snow Maiden with her own hands from improvised materials for the New Year turned out to be very pretty and unusual; step by step photo will help you to easily complete the task.

DIY craft in kindergarten: Snow Maiden (master class)

The child will do the craft "Snow Maiden" in kindergarten for the competition with his own hands. Of course, without help, or at least advice from adults, one cannot do here. Easy and very original version exhibition work - greeting card. Let it first be a Snow Maiden with your own hands (crafts for kindergarten): a master class will help you deal with all the nuances of its manufacture. Then it will be possible to glue several similar products for creative congratulations Happy New Year.

You will need

Thick base paper.
Scissors.
Glue with a brush.
Pencils, markers.
Colored paper set.
Cotton wool or fluffy yarn.
Glitter nail polish.

Procedure

Draw or download a sketch New Year's card. This will require the help of adults.
Cut out the template and transfer it to a sheet of thick paper.
Cut out a kokoshnik from colored paper and glue it to the base. After that, cut out the face of the Snow Maiden from pink paper, also glue it onto the base. Draw eyes, nose and mouth.
Using the same paper as for making the kokoshnik, cut out the short fur coat according to the template. Stick on a blank of thick paper.
Make a "finish out of white fur", pasting on the edge of a short fur coat thin layer cotton wool or yarn "grass".
Cut out mittens, make an edge of cotton wool or yarn. Glue to base.
Apply glitter to the coat and kokoshnik with nail polish.

Decorate the card with hand-drawn or paper-cut snowflakes. Write New Year's greetings. holiday card ready for kindergarten.

Snow Maiden do-it-yourself: crafts to school for the competition

The easiest option for a competition at school for the New Year is to tidy up old doll Barbie and sew a Snow Maiden costume for her. You can make a beautiful "airy" costume from corrugated paper. You will get a real prom queen, such as in the photo.

Snow Maiden made of paper

So, the Snow Maiden with her own hands: crafts to school for a competition, made in the technique of modular origami.

You will need

2 sheets of colored paper with a white back: blue and yellow.
White paper - 1 sheet.
Scheme with description.
Glue.
Scissors.

Description of work

A do-it-yourself snow maiden (craft to school for a competition) is done in this order.

Cut out a square from the blue sheet. Fold it horizontally and vertical directions. Get axles. 2 opposite edges vertically slightly wrap towards the middle. Thus, you turned up the bottom of the fur coat.
Expand the origami wrong side to yourself. Draw 2 oblique lines with a pencil, dividing the central corner into 4 equal parts. Wrap the sides in the middle. Remove the lower corners inside the product. Bend the top corner to front side. Turn the item over.
Cut out a strip of white paper. Bend it as shown in the diagram. Glue in the center. You have made the first module: Snow Maiden's fur coat.
For ready-made crafts, cut a square out of a yellow sheet. Connect 2 opposite corners at the middle. Fold the paper again in the same way. Draw an oblique line above the "face", bend the product along it. Bend the bottom corner, you get a rounded chin.
Make mittens from two small squares of blue paper. Connect the opposite corners at the middle. Mark the line along which it will be bent " thumb". Glue the mittens to the coat.
To make a hat, take a rectangle of blue paper, bend it in half in the transverse direction. Bend the upper corners to the middle. Bend the lower parts to both sides, bend the top. Put a hat on the doll's head, draw her face.

The do-it-yourself Snow Maiden for the school competition turned out well, the time spent on crafts with certain skills is minimal.

The master class is quite simple, it is enough to complete origami once, and the whole algorithm is perfectly remembered.

Snow Maiden with their own hands from threads

Threads are a wonderful material for creativity, affordable and inexpensive. Crafts, including the Snow Maiden with their own hands from threads for the New Year, are non-standard and cute.

thread appliqué

This is the easiest tutorial ever. You can perform such an application for the New Year in lower grades school, kindergarten or at home.

What you need

A sheet from an album for drawing or cardboard - for drawing a sketch.
Cotton wool.
Yarn different texture, shade and thickness.
Scissors.
Kit watercolor paints, brushes.
2 clean rags: dry and moistened.
PVA glue.
Decorations: beads, beads, pieces of serpentine.

Here is such a beauty we should get. However, the initial sketch can be anything.

Procedure

Print the sketch on thick paper or draw.
Cut the threads desired color as small as possible. The finer you cut the threads, the more beautiful the appliqué will look.
Lubricate part of the pattern with glue, carefully lay the threads on top. Run a fringe of a fur coat with cotton wool. Decorate as desired finished craft sequins.

Snow Maiden from pom-poms

From woolen pompoms you can make a Snow Maiden and others new year characters for the Christmas tree at school or kindergarten. Size finished product depends on how many pom poms you use. The simplest product of 3 balls, made like a "snowman". It is recommended to take smooth threads, since it will be much easier to give a pompom a spherical shape.

For work you will need

Fork.
Yarn in different colors.
Scissors.
The floss threads are yellow.
Needle with thread.
Pieces of felt - for the hat and for the hem of the fur coat.
Beads for eyes and mouth.
Decor (optional).

Description

The order of making pompoms is clearly visible in the step-by-step photo.

Craft 3 pom poms: 2 with blue yarn, one with white yarn.
Connect the blanks together with a needle and thread.
Make a felt trim, sew a hat.
Attach eyes and beaded mouth.
Make braids from floss, attach them to the doll's head.
Decorate the toy with decorative elements.

On the Christmas tree in the New Year (at home, at school or kindergarten), such products will look great.

Do-it-yourself Snow Maiden from a plastic bottle (for a kindergarten competition)

From an ordinary plastic bottle, you can make a Snow Maiden with your own hands for a competition in kindergarten.

What do you need to work

Plastic bottle (0.5-1.5 l).
Paper.
PVA glue.
Cotton wool.
Blue colored paper.
Yarn (woolen or acrylic) yellow.
Kit acrylic paints, brushes.

Master Class

Cover the bottle with colored paper.
Roll up a cotton ball. Dilute PVA glue with water. Wetting the paper in the adhesive mixture, cover it with cotton ball. This technique is called papier-mâché.
Glue 2 identical small cones from blue paper, fill them with cotton. These will be the hands.
Glue the hands and head to the bottle.
Paint the head of the craft. Highlight blue or blue color cap.
From cotton wool, make a trim for a fur coat and hat.
Weave the yarn into a pigtail, attach it to the edge of the hat.

Do-it-yourself New Year's Snow Maiden from a plastic bottle (for a kindergarten competition) is ready.

An interesting video of a master class for a school or kindergarten.

Do-it-yourself Snow Maiden from felt for the New Year: patterns and a detailed description

The Snow Maiden looks pretty with her own hands from felt for the New Year: you can make patterns yourself or download ready-made ones.

What is useful for crafts

Pieces of 5 mm white and blue felt.
Pearlescent acrylic outline.
Multicolored beads.
A set of pastel pencils.
White writing paper.
Carbon paper.
Thermal gun. It can be replaced with Moment glue.
Pattern.
Scissors.
Needle, thread.
Marker or pencil.
Beads for eyes.

Description of the master class